Connecting Your Loudspeakers

It is critical for proper performance that all speakers (left, right, center and rear) be connected in proper phase. Note that one terminal on each speaker (+) is colored red and the other (-) is colored black. Please make certain that you connect the red (+) terminal on each speaker to the red (+) terminal of its channel on your amplifier or receiver, and the black (-) terminal to the black (-) terminal. It is essential that all speakers be connected in the same way to the amplifier (in phase). If you experience a great lack of bass, it is likely that one speaker is out of phase with the others.

Usually if distortion is heard when the speakers are being driven at loud levels, it is caused by driving (turning up) the amplifier too loud and not driving the speakers with more power than they can handle. Remember, most amplifiers put out their full-rated power well before the volume control is turned all the way up! If your speakers distort when you play them loud, turn down the amplifier or get a bigger one.

Positioning the BPVXs in Your Room

For Rear or Side Surround Speakers

The BPVXs are designed to be extremely flexible in terms of their placement when used as surround speakers. They may be used on the side walls, rear walls or in the rear corners of the listening room. When placed along the side walls the speakers should normally be located adjacent to or behind the listening position. The speakers may also be placed near the rear corners of the room or located on the rear wall. If you have your couch or listening position near or against the rear wall, we suggest rear wall placement of the BPVXs with them positioned on either side of the couch and in from the side wall. High placement is preferred, however, mid- wall or floor placement is acceptable. Normally speakers would be hung on the wall with the input connection plate up against the wall, however, the BPVXs may also be placed on shelves or stands. Of course, experimentation is encouraged to get the best performance in your particular room. As a starting point, we suggest mounting the speakers on the side walls behind the listening position about 3-6 feet off the floor and halfway between the listening position and the rear wall. If possible, do not put the speakers forward of the listening position.

For Front Main (Left and Right) Speakers

Because of their superb performance characteristics, the BPVXs can also be used as a front main system. In this configuration they should normally be placed about 6-8 feet apart approximately at ear level with the inside facing baffle, which has drivers mounted on it, facing towards the listening position.

Full Range Bipolar Surround/Satellite Speaker System, BPVX specifications

The Definitive Technology Full Range Bipolar Surround/Satellite Speaker System, known as the BPVX, is an exceptional audio solution designed to elevate the home theater experience. Renowned for its ability to deliver immersive soundscapes, this system combines cutting-edge technology with meticulous engineering, making it a favored choice among audiophiles and cinema enthusiasts alike.

One of the standout features of the BPVX is its bipolar design. This unique configuration allows the speakers to project sound from both the front and rear, creating a more expansive listening environment. The result is a three-dimensional audio experience that envelops the listener, making it feel as though they are in the midst of the action on screen. This technology effectively broadens the sweet spot, allowing for a consistent sound experience, regardless of where you are seated in the room.

The BPVX is equipped with a robust suite of drivers that ensure clear and dynamic sound reproduction. Each speaker features proprietary aluminum dome tweeters that deliver crisp highs, while the mid-range drivers produce well-defined vocals and instruments. Furthermore, the speakers are designed to handle a broad frequency range, delivering deep bass without the need for a separate subwoofer in smaller setups.

Another critical aspect of the BPVX system is its versatility. The speakers can easily be mounted on walls or used on stands, making them adaptable to a variety of home theater configurations. This flexibility allows users to optimize their audio setup according to their room size and aesthetic preferences.

The build quality of the BPVX is also noteworthy. The speakers boast a sleek, modern design that complements any home decor while ensuring durability. The enclosure is crafted to minimize resonance, allowing for a clean, undistorted sound that enhances audio clarity.

In addition, the BPVX system is compatible with a wide range of surround sound formats, positioning it as a top choice for both casual listeners and serious cinephiles. Whether streaming movies, playing video games, or enjoying music, the Definitive Technology Full Range Bipolar Surround/Satellite Speaker System promises a rich, immersive audio experience that transforms any entertainment setting into a true cinematic experience.