Using the Configuration Utility
Status
If you enable WEP encryption or Turbo Mode make sure to enable WEP encryption and Turbo Mode on all the devices in your network.
The Status screen displays the current properties of the
Connection Status- indicates the connection status: either connected or discon- nected.
Network Name- | displays the network name that you have input |
|
Network Type- | indicates either Infrastructure, | |
|
| |
WEP Status- | either Enable or Disable |
|
WEP stands for Wired Equivalent Privacy. It is a |
| |
security protocol for Wireless Local Area Networks |
| |
Speed- | indicates data rate speed |
|
Signal Strength- | displays the signal strength |
|
MAC Address- | Media Access Control address is a unique hardware address | |
| that identifies the |
|
Radio Status- | ON or OFF |
|
Turbo Mode- | Enable or Disable. Disable is the default setting |
|
Click OK or Apply- | click Apply to save the changes | 16 |