D-Link DWL-G520+ manual Cannot connect to the access point or the wireless router

Page 35

Troubleshooting

2.I cannot connect to the access point or the wireless router.

„Make sure that the SSID on the DWL-G520+ PCI adapter is exactly the same as the SSID on the Access Point or wireless router.

„Move the DWL-G520+ and Access Point or Wireless router into the same room and then test the wireless connection.

„Disable all security settings. (WEP, MAC Address Control, AES)

„Make sure that the Radio is not locked down to a different frequency

„Turn off your Access Point and the computer with the DWL-G520+. Turn on the Access Point, and then turn on the computer with the DWL-G520+.

„Refresh the DWL-G520+ Utility

3.The DWL-G520+ Power and Link lights are not on.

„Check to see if the DWL-G520+ PCI adapter is firmly inserted into the PCI slot of your desktop computer.

4.I forgot my Encryption key.

„Reset the Access Point to its factory default settings and restore the DWL-G520+ Wireless PCI Adapter to the factory default settings. (The default settings are listed in the Using the Configuration Utility section in this manual.)

5.The computer does not recognize the DWL-G520+ Wireless Adapter.

„Make sure that the DWL-G520+ Wireless Adapter is properly seated in the computer’s PCI slot.

„If Windows does not detect the hardware upon insertion of the adapter, make sure to completely remove drivers that were previously loaded. To remove the drivers, do the following:

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Link AirPlus Xtreme G+TM DWL-G520+ Contents Package Contents Introduction Features Wireless Basics Wireless Basics Standards-Based Technology Installation Considerations Link AirPlus Xtreme G+ DWL-G520+ or D-Link AirPlus DWL-520+ „ a wireless Router D-Link AirPlus Xtreme G+ DI-624+Getting Started Link AirPlus Xtreme G+ DWL-G650+ or D-Link AirPlus DWL-650+DWL-G520+with IP Address Using the Configuration Utility Link Info Configuration Encryption Add Site SurveyAvailable Networks ProfilesAdd New Profile About Networking Basics Using the Network Setup Wizard in Windows XPNetworking Basics Enter a Computer description and a Computer name optional Networking Basics Networking Basics Networking Basics Network Setup Wizard „ Right-click on My Computer Naming your ComputerComputer name Checking the IP Address in Windows XPAssigning a Static IP Address in Windows XP/2000 Network Connections „ Click on Internet Protocol TCP/IP „ Click Properties Assigning a Static IP Address Windows XP/2000 Checking the Wireless Connection by Pinging in Windows XP Manager TroubleshootingProperties Hardware TabTroubleshooting Forgot my Encryption key Cannot connect to the access point or the wireless routerDWL-G520+ Power and Link lights are not on Computer does not recognize the DWL-G520+ Wireless AdapterTroubleshooting How can I troubleshoot distance issues using the DWL-G520+ Technical Specifications Data Rates Media Access ControlPower Consumption Transmitter Output PowerTech Support for customers within Canada Contacting Technical SupportWarranty and Registration Page Important Note
Top Page Image Contents