D-Link DFE-530TX manual Unpack and Inspect, Install the Adapter

Page 15

DFE-530TX 10/100Mbps Ethernet Adapter for PCI Bus

2

Installation

Installation of a DFE-530TX Ethernet Adapter requires hardware installation first, then software installation.

Unpack and Inspect

CAUTION: Under ordinary circumstances, a DFE-530TX card will not be affected by static charge as may be received through your body during handling of the unit. In special circumstances where you may carry an extraordinarily high static charge, it is good practice to reduce the charge by touching a ground before handling the adapter card.

Open the shipping carton and carefully remove all items. In addition to this User's Guide, ascertain that you have:

One DFE-530TX Ethernet Adapter Card.

DFE-530TX Software Diskette.

Install the Adapter

1.Shut down the computer, unplug its power cord, and remove the chassis cover.

7

Image 15
Contents Rev February Copyright Statement Hardware Limited WarrantySoftware Limitation of Warranties Page Table of Contents Page About Fast Ethernet IntroductionAbout Auto-negotiation Installation About PCI Bus FeaturesDFE-530TX 10/100Mbps Ethernet Adapter for PCI Bus Page Unpack and Inspect Install the AdapterDFE-530TX Ethernet/Fast Ethernet Adapter for PCI Bus Connect the Network Cable Connecting for Fast Ethernet 100MbpsConnecting for 10Mbps Ethernet Software InstallationTroubleshooting Troubleshooting Specifications SCO Unix Offices Registration Card Your comments on this product