D-Link DWL-G700AP manual Support tab, Control Panel

Page 28

Networking Basics (continued)

Checking the IP Address in Windows XP

This window will appear.

Click the

Support tab.

Click Close.

Assigning a Static IP Address in Windows XP/2000

Note: Residential Gateways/Broadband Routers will automatically assign IP Addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are using a DHCP-capable Gateway/Router you will not need to assign Static IP Addresses.

If you are not using a DHCP capable Gateway/Router, or you need to assign a Static IP Address, please follow these instructions:

Go to Start.

Double-click on

Control Panel.

28

Image 28

Contents DWL-G700AP Building Networks for PeopleContents Package Contents Introduction Features and Benefits LedsWireless Basics People use Wlan technology for many different purposesWireless Basics Installation ConsiderationsSetting up a Wireless Infrastructure Network1 Getting StartedUsing the Configuration Utility User Name fieldHome Wireless WEP Select Enabled or DisabledHome LAN IP AddressHome Dhcp Advanced Performance Advanced Filters Tools Admin Tools SystemTools Firmware Status Device InfoStatus Log View LogStatus Stats Status WirelessHelp Networking Basics Microsoft Windows XPNetworking Basics Enter a Computer description and a Computer name optional Workgroup nameNetworking Basics Networking Basics Networking Basics Networking Basics Naming your Computer Right-click on My ComputerChecking the IP Address in Windows XP Computer nameSupport tab Control PanelConnections Network ConnectionsProperties Click on Internet Protocol TCP/IP Click Properties Default GatewayIP Address e.g Subnet Mask Networking Basics Troubleshooting Troubleshooting Go to Start Right-click on My Computer Double-click on Network Resetting the DWL-G700AP to Factory Default Settings Technical Specifications Wireless Transmit Power PowerTemperature DimensionsTechnical Support Page Page 05/07/04