D-Link DWL-G132 manual Advanced

Page 19

Using the Configuration Utility (continued)

Advanced

Frequency:

Select 802.11b/g for compatibility with both 802.11b or 802.11g networks, or select 802.11b only.

Super G:

Selecting Super G mode enables a maximum wireless signal rate of up to 108Mbps.*

Starting Ad Hoc Network:

When using Ad Hoc mode, select the frequency here.

Ad Hoc Channel:

Select the Ad Hoc channel when in Ad Hoc mode. When communicating in Ad Hoc mode, all devices must share the same channel.

Profile IP Settings:

You can Enable or Disable the IP Settings portion of your profile here. If you select Disable you will need to configure the IP address information each time you connect to a network. If you select Enable you will maintain the same IP address information each time you connect to a network.

Power Mode:

Disable -This default setting consumes the most power.

Enable - This setting consumes the least power.

Launch Utility on Startup:

Select Enable or Disable.

Click Apply if you have made any changes.

*Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate.

19

Image 19

Contents Link AirPlus Xtreme GTM DWL-G132 Contents Package Contents Introduction Introduction Fully 802.11b/802.11g compatible Features and BenefitsPeople use Wlan technology for many different purposes Wireless BasicsInstallation Considerations Wireless BasicsGetting Started DWL-G132 Getting StartedSetting up a Wireless Ad-Hoc Network View Available Wireless Networks UsingtheConfigurationUtilityStatus Using the Configuration UtilityWireless Mode Link InfoTx Rate Signal QualityEncryption Connection InfoSelect Enabled or Disabled ConfigurationData Encryption IP Settings Proxy Settings HTTP, Secure, FTP, Gopher Socks Use the same proxy server for all protocolsAdvanced RTS Threshold Fragmentation ThresholdSite Survey Configuration or Properties you can Configuration, Add or PropertiesSite Survey Add Advanced Configure Authentication WPAClick Authentication Config Authentication WPA Advanced Security Settings Authentication WPA -PSK Authentication WPA Advanced Security Settings AddAuthentication WPA-PSK About Advanced Security SettingsNetworking Basics Using the Network Setup Wizard in Windows XPNetworking Basics Enter a Computer description and a Computer name optional Networking Basics Networking Basics Networking Basics Networking Basics Computer Description if you wish this field is optional Right-click on My Computer Select PropertiesLocal Area Connection icon in the task bar Checking the IP Address in Windows XPControl Panel Assigning a Static IP Address in Windows XP/2000Networking Basics Protocol TCP/IP Click Properties Checking the Wireless Connection by Pinging in Windows XP Hardware Tab Click Device Manager Go to Start My Computer PropertiesLink AirPlus G DWL-G132 Wireless USB Adapter TroubleshootingWhy can’t I get a wireless connection? Why does my wireless connection keep dropping?Bus Type TemperatureMedia Access Control StandardTechnical Specifications Technical Support Warranty and Registration Page Important Note