D-Link DWL-650+ manual Getting Started, Setting Up an Infrastructure Network

Page 10

Getting Started

Setting Up an Infrastructure Network

DWL-650+

Fig. 4.1

Please remember that D-Link AirPlus wireless devices are pre-configured to

connect together, right out of the box, with the default settings.

You will need a broadband Internet access (Cable/DSL) subscription.

Consult with your Cable/DSL provider for proper installation of the modem.

Connect the modem to a wireless Broadband router (such as the

D-LinkDI-713P.)See the Quick Installation Guide included with the

router.

If an Ethernet port is available on the router, connect a computer that is equipped with an Ethernet Network adapter (such as the DFE-530TX+) to the router.

Install the drivers for the wireless network adapter (such as the D-LinkAirPlus DWL-650+) into the laptop computer. See the

Quick Installation Guide included with the DWL-650+.

Please refer to the following sections of this manual for additional information about setting up a network:

Networking Basics- learn how to check your IP Address; share printers and files.

Using the Configuration Utility- learn the settings you must use on each computer in your network for successful communication.

Troubleshooting – learn how to check for the proper installation of the network adapters’ drivers and other tips for troubleshooting the network.

10

Image 10

Contents LinkAirPlus DWL-650+ Contents Package Contents Introduction Power Link Product FeaturesLEDs Wireless Basics Wireless Basics Standards Based TechnologyInstallation Considerations Getting Started Setting Up an Infrastructure Network Getting StartedSetting up a Wireless Ad Hoc Network IP AddressInstalling the DWL-650+ Windows XP, 2000, Me, or 98 Installation\Setup.exe Installing the DWL-650+Drivers and Utility Select No, I will restart my computer later For Windows XP, FigUsing the Configuration Utility Double-click on the Configuration Utility iconConfiguration Utility Link InfoConfiguration Encryption Profiles Site SurveyAvailable Networks PropertiesProperties About Troubleshooting Adapters TroubleshootingAirPlus DWL-650+ Wireless Adapter StatusComputer does not recognize the DWL-650+ Wireless Adapter Cannot connect to the access point or the wireless routerDWL-650+ Power and Link lights are not on Forgot my Encryption keyTroubleshooting Using the Network Setup Wizard in Windows XP Networking BasicsNetworking Basics Enter a Computer description and a Computer name Networking Basics Networking Basics Networking Basics Network Setup Wizard Windows XP Naming your ComputerComputer Select Properties and click Name Type Command Checking the IP Address in Windows XP/2000Control Panel Assigning a Static IP AddressNetwork Connections Area Connections Click Properties Protocol TCP/IPClick OK Connecting to a Wireless Network in Windows XP Select Obtain DNS server address automaticallyConnecting to a Wireless Network in Windows Connecting to a Wireless NetworkIP address Subnet mask Select Use the following IP address Connecting to a Wireless Network in Windows Me Checking the Wireless Connection by Pinging For Windows XPChecking the Wireless Connection by Pinging For Windows MeAdding a local printer Printers and Faxes Click on Add a printerSelect Local printer attached to this computer Select Use the following portAdding a local printer Adding a local printer Go to Start Printers Faxes Printers and FaxesAdd a Printer Networking Basics Sharing a network printerPrinter Sharing a network printer Select Browse for a printerTo check for proper installation Go to Start Sharing an LPR printer Local PrinterSelect Create a new port Click Settings Networking Basics Sharing an LPR printerClick Have Disk Click Next Select Yes, to print a test Technical Specifications Other TasksPhysical Dimensions Diagnostic LEDPower Specifications TemperatureContacting Technical Support Link Technical Support over the InternetLimited Warranty and Registration What You Must Do For Warranty ServiceWhat Is Not Covered