D-Link DWL-610 manual Using the Configuration Utility

Link Info

Using the Configuration Utility (continued)

After clicking on the Configuration Utility icon, the Link Info screen will display the settings for the DWL-610:

Status:

Displays the MAC Address of the

Access Point or Router to which the

DWL-610 is associated

SSID:

The Service Set Identifier is the name assigned to the wireless network.

The factory SSID setting is default.

Frequency:

802.11b indicates that the DWL-610 is communicating in the 2.4GHz

band.

Wireless Mode:

Either Infrastructure or Ad-Hocwill be displayed here. (Please see the Getting Started section in this manual for an explanation of these two modes.)

Encryption:

You can see if WEP (Wired Equivalent Privacy) is Enabled or Disabled here.

Tx Rate:

The default setting is Auto; Tx Rate settings are automatically determined for an optimal speed up to a maximum of 11Mbps.

Channel:

The default setting is Auto. The channel selection is automatically determined by the DWL-610.

Signal Strength/Link Quality:

Displays the Link Quality for the DWL-610 wireless connection to the access point. The Signal Strength represents the wireless signal between the access point and the DWL-610. The percentage coincides with the graphical bar

Packet Count:

Displays the statistics of the data packets that are transmitted and received.

Rescan Button:

Rescans for the strongest signal in your environment and associates with that Access

Point or Router 12