DSL-200 ADSL USB Modem User’s Guide
10. In the Setup Complete window, click Finish.
11.The DSL Installer window asks you to plug in the Modem. Plug the rectangular end of the USB cable into the USB port of your PC, and then plug the square end of the USB cable into the USB port of the ADSL Modem. The USB Modem will be detected and messages will be displayed as the modem software is installed.
Note: For Windows 2000 applications, the “Digital Signature Not Found” window will appear again. Click Yes to allow the installation to continue.
Also for Windows 2000 applications, the “Found New Hardware Wizard” window indicates the modem has been installed and suggests you reboot the system to have new settings take effect. Click Finish.
12.You now need to restart the computer to complete the installation of the driver. You may do this now by clicking Yes.
Upon restarting your computer, a new icon (two arrows) will appear in the System Tray.
If you are using PPP (WAN driver only) the
10