D-Link DWL-700AP manual Advanced Performance, Beacon Interval Beacons are

Page 15

Using the Configuration Utility (continued)

The default Performance settings

Advanced > Performance

are shown here.

 

Beacon Interval: Beacons are

 

packets sent by an access point to

 

synchronize a wireless network.

 

Specify a beacon interval value.

 

Default (100) is recommended.

 

RTS Threshold: This value

 

should remain at its default setting

 

of 2,437. If you encounter inconsis-

 

tent data flow, only minor modifica-

 

tions to the value range between

 

256 and 2,437 are recommended.

 

Fragmentation: This value should

remain at its default setting of 2,347. If you experience a high packet error rate, you may slightly increase your fragmentation threshold within the value range of 256 to 2,346. Setting the fragmentation threshold too low may result in poor performance.

DTIM Interval (Beacon Rate): (Delivery Traffic Indication Message) Enter a value between 1 and 255 (default is 3) for the Delivery Traffic Indication Message. A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages.

Basic Rates: Default is 2Mbps. We recommend that you keep the setting at default. If you lose connection at the TX rate, you will regain connection at the basic rate. A lower basic rate will make reconnection easier.

TX Rates: Select the transmission rate for the network. The default rate is 11Mbps.

Preamble: Long Preamble is the default setting. (High traffic networks should use the shorter preamble type.) The preamble defines the length of the CRC block (Cyclic Redun- dancy Check is a common technique for detecting data transmission errors) used in communication between the access point and the roaming wireless network adapters.

Authentication:

Open System - communicates the key across the network.

Shared Key - devices must have identical WEP settings to communicate. Auto - automatically adjusts to the Authentication mode of the wireless client.

SSID Broadcast: (Service Set Identifier) Enable or Disable (default) the broadcast of the SSID name across the network. SSID is a name that identifies a wireless network. All devices on a network must use the same SSID to establish communica- tion.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents DWL-700AP Contents Package Contents Introduction LEDs Features and BenefitsPeople use Wlan technology for many different purposes Wireless BasicsInstallation Considerations Wireless BasicsGetting Started Setting up a Wireless Infrastructure Network1Using the Configuration Utility Home Wizard Using the Configuration UtilityHome Wireless IP Address Home LANHome Dhcp Advanced Mode Beacon Interval Beacons are Advanced PerformanceAdvanced Filters Tools System Tools AdminStatus Device Info Tools FirmwareView Log Status LogStatus Wireless Status StatsHelp Networking Basics Using the Network Setup Wizard in Windows XPNetworking Basics Enter a Computer description and a Computer name optional Networking Basics Networking Basics Networking Basics Networking Basics Naming your Computer Checking the IP Address in Windows XP Assigning a Static IP Address in Windows XP/2000 Network Connections Assigning a Static IP Address Windows XP/2000 Checking the Wireless Connection by Pinging in Windows Me/98 Troubleshooting Troubleshooting Click Device Manager Right-click on Link Air DWL-650 Wireless Cardbus Adapter Resetting the DWL-700AP to Factory Default Settings Technical Specifications Technical Specifications Technical Support USA only Warranty and RegistrationPage Important Note
Related manuals
Manual 8 pages 54.33 Kb

DWL-700AP specifications

The D-Link DWL-700AP is a versatile wireless access point designed for small to medium-sized networks, offering robust performance and reliability. Released as part of D-Link's extensive lineup of networking solutions, the DWL-700AP caters to both home users and businesses by providing seamless connectivity and extensive features.

One of the main characteristics of the D-Link DWL-700AP is its compliance with the IEEE 802.11b/g standards, allowing it to operate on both 2.4 GHz and 5 GHz frequency bands. This dual-band functionality ensures compatibility with a wide range of wireless devices while delivering data rates of up to 54 Mbps in the 802.11g mode. The access point supports a variety of wireless encryption protocols, including WEP, WPA, and WPA2, ensuring that users can maintain a secure network environment to protect against unauthorized access.

The DWL-700AP is equipped with a versatile operating mode, enabling it to function as an access point, bridge, or repeater. This flexibility allows for easy integration into existing network infrastructures and supports various network topologies. In access point mode, the DWL-700AP can expand wireless coverage and connect multiple devices seamlessly. In bridge mode, it can connect two network segments while extending WLAN coverage, and in repeater mode, it amplifies signal strength to cover larger areas.

Additionally, the DWL-700AP features a built-in DHCP server, enabling it to assign IP addresses automatically to devices within the network. This simplifies network management and allows for easy scalability as more devices connect. The access point also supports Quality of Service (QoS) to prioritize bandwidth for essential applications, such as video streaming and VoIP communications, ensuring optimal performance for critical tasks.

With its sturdy and compact design, the DWL-700AP can be easily mounted on walls or ceilings, making it suitable for various installation scenarios. The integrated antennas provide a strong and reliable wireless signal, while the external antenna connectors allow for further customization and coverage enhancement if needed.

In summary, the D-Link DWL-700AP is a reliable, feature-packed access point that caters to a variety of networking needs. Its combination of security features, versatile operation modes, and ease of management make it an excellent choice for users looking to enhance their wireless connectivity. Whether used in a home or small business environment, the DWL-700AP stands out as an effective solution for creating a robust wireless network.
Top Page Image Contents