Advanced

Configuration Utility

Frequency - Select the Frequency here. Auto is the default setting.

Starting Ad-Hoc Network - Each wireless adapter communicating in Ad-Hoc mode must have the same setting here.

Turbo Mode - To enable Turbo mode, all devices must have the same setting Ad-Hoc Channel - All devices in the Ad-Hoc network must have the same channel Encryption Type - Select the Encryption type

Profile IP Settings -You can Enable or Disable the IP Settings portion of your profile here. If you select Disable you will need to configure the IP Address information each time you connect to a network. If you select Enable you will maintain the same IP Address information that you have configured each time you connect to a network.

Launch Utility on Startup - Select Enable or Disable

Data Packet Parameter - Select the parameters here

Fragmentation Threshold - This value should remain at its default setting of 2346. If you experience a high packet error rate, you may slightly increase your Fragmentation Threshold within the value range of 256 to 2,346. Setting the Fragmentation Threshold too low may result in poor performance.

RTS Threshold - This value should remain at its default setting of 2346. If inconsistent data flow is a problem, only a minor modification should be made.