D-Link DWL-AG530 manual Setting up a Wireless Ad-Hoc Network

Page 12

Getting Started (continued)

Setting up a Wireless Ad-Hoc Network

DWL-AG530

DWL-AG660

Install the D-LinkDWL-AG530Wireless PCI Adapter into the desktop computer. (See the Quick Installation Guide included with the DWL- AG530).

Install the DWL-AG660into a laptop computer. (See the Quick Installation Guide included with the DWL-AG660).

Set the wireless configuration for the adapters to Ad-Hoc mode, set the adapters to the same channel, and assign an IP address to each computer on the Ad-Hoc network. (See box below).

IP Address

When assigning IP addresses to the computers on the network, please remember that the IP address for each computer must be in the same IP address range as all the computers in the network, and the subnet mask must be exactly the same for all the computers in the network.

For example: If the first computer is assigned an IP address of 192.168.0.2 with a subnet mask of 255.255.255.0, then the second computer can be assigned an IP address of 192.168.0.3 with a subnet mask of 255.255.255.0, etc.

IMPORTANT: If computers or other devices are assigned the same IP address, one or more of the devices may not be visible on the network.

12

Image 12
Contents DWL-AG530 Contents Package Contents Introduction Features Wireless Basics ActivityLink Wireless Basics „ D-Link AirPremierTM AG DWL-AG660Standards-Based Technology Installation Considerations „ a wireless router D-Link AirPremierTM AG DI-784 Getting StartedLink Air PremierTM AG DWL-AG660 Link Air PremierTM AG DWL-AG530Setting up a Wireless Infrastructure Network Getting StartedSetting up a Wireless Ad-Hoc Network UsingtheConfigurationUtility Link AirPremierAGTM D-Link AirPremier Agtm UtilityUsing the Configuration Utility Authentication IP SettingsData Encryption Key LengthObtain an IP Address Automatically Assign the following IP AddressObtain DNS Server Address Automatically Use the following DNS Server addressAuthentication WPA/WPA2 Authentication ConfigAuthentication Config WPA-PSK/ WPA2-PSK does not re PSK/WPA2-PSK configuration isSelect WPA-PSK/WPA2 Profile IP Settings Power ModeSuper A/G Starting Ad-Hoc NetworkAvailable Network ProfileRefresh AdvancedAdd, Configuration, Properties Networking Basics Microsoft Windows XPNetworking Basics Enter a Computer description and a Computer name optional Networking Basics Networking Basics Networking Basics Networking Basics Naming your Computer „ Right-click on My ComputerChecking the IP Address in Windows XP Local Area Connection icon in the task barAssigning a Static IP Address in Windows XP/2000 Networking Basics Default Gateway „ Click PropertiesIP Address e.g Subnet Mask Networking Basics Troubleshooting Hardware Tab „ Click Device ManagerTroubleshooting Cannot connect to the access point or the wireless router DWL-AG530 Power and Link lights are not onForgot my Encryption key Uncheck Hide extension for known file types click on Apply How can I avoid connection problems using the DWL-AG530? Physical Dimensions WeightStandards Bus TypeTechnical Specifications Warranty and Registration USA onlyPage Important Note How to Replace the Bracket AppendixInner Authentication EAP TypesAppendix Definitions of TermsValidate Server Certificate Appendix Definitions of Terms Domain NameTtls Identity Trusted CA List