D-Link DUB-E100 specifications Installation is Complete, Tx/Rx Led

Installation is Complete!

Installation of the DUB-E100 is complete. The LINK LED should be solid green, indicating a good physical connection between the DUB-E100 and the network. The TX/RX LED indicates when data is being transmitted or received. If both LEDs are unlit, there may be a problem with the physical connection. Check the cables between your DUB-E100, the computer, and the network. Verify that your network switch, hub, or router is powered on.

LINK LED:

Lights up solid green when the DUB-E100 has a good physical connection to the network.

TX/RX LED:

Flashes green when data is transmitted/received at 100Mbps. When data is transmitted/received at 10Mbps the LED flashes amber.

10