Using the Configuration Utility (continued)
Advanced > Performance
Wireless Band-
802.11g
Turbo Setting-
This function is set to
Disabled. It cannot be
Enabled.
Frequency-
The frequency remains at 2.437 GHz.
Channel- | Select from channels |
| (FCC |
Data Rate- | The Data Rates are Auto, 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, 9Mbps, |
| 11Mbps, 12Mbps, 18Mbps, 24Mbps, 36Mbps, 48Mbps, 54Mbps. |
Beacon Interval-
DTIM-
Beacons are packets sent by an access point to synchronize a net- work. Specify a beacon interval value. The default (100) is recom- mended.
(Delivery Traffic Indication Message) - 1 is the default setting. DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages.
Fragment
Length-
RTS Length-
Transmit
Power-
The fragmentation threshold, which is specified in bytes, determines whether packets will be fragmented. Packets exceeding the 2346 byte setting will be fragmented before transmission. 2346 is the de- fault setting
This value should remain at its default setting of 2,346. If you en- counter inconsistent data flow, only minor modifications to the value range between 256 and 2,346 are recommended
Choose full, half
12