BASIC CONFIGURATION
The CG3500 contains all necessary software. You don’t need to configure the CG3500, but you must configure your computer for TCP/IP and check for an IP address. Your service provider may provide additional instructions for setting up your computer. The following basic instructions are for Windows™ 95 or Windows 98. If you are using a different operating system, refer to that user guide.
Configuring for TCP/IP
1
2
3
4
On the Windows Desktop, click Start.
Select Settings and then Control Panel from the
Select the Configuration tab on the Network window.
5 Check to see if TCP/IP has been installed for the Ethernet card. If TCP/IP appears in the list of network components, it is installed and you can proceed to step 10. If it doesn’t appear on the list, continue with step 6.
1 4