CONFIGURATION | SECTION 3 |
|
|
4The Wireless Network Properties window is displayed:
5If the network you want to configure is open (no encryption, no authentication), click OK and this network is added to the list of preferred networks.
6If the network is not open and requires WEP data encryption, click Data encryption (WEP enabled).
7If the network is not open and requires network authentication, click Network Authentication (Shared mode).
8Edit the fields that you want to change for the selected wireless network. For additional information about the fields on this window, refer to Configuring a New Wireless Network.
9Click OK.
SECTION 3, CONFIGURATION |