Overview | Installation | Troubleshooting | Contact | FAQ | Glossary | License |
Configuration: Basic Advanced TCP/IP Wireless
DSL modem users:
You may need to configure PPPoE to work with your VT2442:
•
•
•
•
On a computer connected to one of the VT2442 Ethernet ports, open a Web browser.
In the Address field, type http://192.168.15.1 and press ENTER.
In the Username and Password fields, type router and click Log In. The HOME page is displayed.
Click SETUP followed by WAN Configuration. From the Type
•
•
•
•
•
Type the Username and Password you normally use to log in to your DSL service.
In the Keep Alive field, type 0 to ensure that your DSL link is always active.
Click Connect to start your Internet connection.
Click Save. Go back to step 13 to test your Internet connection.
For details and more screen shots, see “Logging In to the VT2442” on page 13 and “WAN Setup for PPPoE (DSL)” on page 17.
When your Internet connection works, go to C “Connecting Your Telephone” on page 11.
C
Connecting Your Telephone
1Connect a telephone cord to the green Phone 1 port on the VT2442. If you only subscribed to one phone line from Vonage, you must connect your phone to the Phone 1 port.
2If you subscribed to a second phone or fax line from Vonage, connect a telephone or fax machine to the Phone 2 port.
3Check for a dial tone. If you hear a recording instructing you to connect your phone to the Phone 1 port, please do so. If you hear neither this message nor a dial tone, refer to “Troubleshooting” on page 65.
4If you hear a dial tone, call
VT2442 Voice Gateway User Guide | 11 |