3Com 3C985B-SX, 3C986-T, 710026, 710011, 710024, 710025 manual Installing the NIC Software

Page 30

 

2

Installing the NIC Software

 

 

 

NIC Configuration Parameters (continued)

 

 

 

 

Parameter

Description

 

 

 

Duplex

When you disable link negotiation while installing a 1000Base-SX or

 

10/100/1000Base-T NIC, you can select either half-duplex or

 

full-duplex operation. If you select this field and press <Enter>, you

 

are prompted to choose between “full” and “half” settings:

 

■ When “full” is selected, full-duplex signaling is enabled (default).

 

■ When “half” is selected, half-duplex signaling is used.

Speed

If link negotiation has been disabled, you can select port speed to

 

be either 10Mbps, 100Mbps, or 1Gbps.

RxFlowControl

When you select this field and press <Enter>, you are prompted to

 

choose between “allow” and “off” settings:

 

■ When “allow” is selected, and link parameter is set to “auto,”

 

the NIC negotiates 802.3x receive flow control with the device

 

at the other end of the link. If the other device supports 802.3x

 

flow control, Rx flow control is enabled.

 

■ When “off” is selected, or link parameter is “off,” receive flow

 

control is disabled.

 

TxFlowControl

When you select this field and press <Enter>, you are prompted to

 

choose between “allow” and “off” settings.

 

■ When “allow” is selected, and link parameter is set to “auto,”

 

the NIC negotiates 802.3x transmit flow control with the device

 

at the other end of the link. If the other device supports 802.3x

 

flow control, Tx flow control is enabled.

 

■ When “off” is selected, or link parameter is “off,” transmit flow

 

control is disabled.

 

FDRFiltering

When you select this field and press <Enter>, you are prompted to

 

choose between “on” and “off” settings:

 

■ Use “on” if the NIC is attached to a full-duplex repeater.

 

■ Use “off” or leave the field blank if the NIC is not connected to

 

a full-duplex repeater.

 

 

NOTE: FDRFiltering is ignored on NIC models 710011 and 710012.

 

This parameter is included to maintain driver compatibility with

 

earlier models.

 

 

 

 

26

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Installation User Guide 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Contents Installing DynamicAccess Software Preface About This GuideOther Important Documentation Contacting 3Com World Wide Web Site Online Technical Services3Com Knowledgebase Web Services 3Com FTP SiteAccess by Digital Modem 3Com Bulletin Board ServiceAccess by Analog Modem 3Com Facts Automated Fax ServiceSupport from Your Network Supplier Support from 3ComCountry Region Telephone Number Asia Pacific Rim EuropeEurope, South Africa, and Middle East Country Region Telephone Number Latin America North AmericaReturning Products for Repair Country Region Telephone Number Fax NumberPage System Requirements Windows NT Installing the NICSystem Requirements WindowsImportant Components System Requirements Novell NetwareSafety Precautions Pre-Installation ChecklistNIC Installation Remove the system cover, and select any empty PCI slotPrepare an appropriate cable Connecting the Network Cables1000Base-SX Fiber NIC Medium Diameter Frequency Cable Type Operating RangePort Type Connector Media Maximum Distance 10/100/1000Base-T NICInstalling the NIC Software Installing the Software in Windows NTInstalling the NIC Software Installing the Software in Windows Modifying Configuration Parameters Adapter Windows NT 4.0 onlyLink Negotiation Rx Flow Control Full Duplex EnabledTx Flow Control Port Link SpeedInstalling the Software in NetWare NetWare Pre-Installation RequirementsNetWare OS File Name Files to be Installed Installing the NIC Driver for NetWare Installing the Driver NetWare Already InstalledLoad 3c986 slot=4 frame=Ethernet802.2 name=3c9861e822 Parameter Descriptions Installing the Driver Initial Installation of NetWare NIC Load Parameters DescriptionsNIC Configuration Parameters Description Installing the NIC Software NIC Configuration Parameters Parameter Description1000Base-SX NIC ConnectorsVerifying NIC Functionality LEDs10/100/1000Base-T Port LED Activity Page Installing DynamicAccess Software About DynamicAccess SoftwareClick Install DynamicAccess Technology When prompted, click Yes Install DynamicAccess TechnologyFeature Specification SpecificationsSpecification Measurement Condition Operating Specification Storage SpecificationWarranty Software License Agreement 3Com Corporation Limited WarrantyWarranty and Software License Agreement FCC Class B Statement FCC Declaration of ConformityImportant Read Before Using This Product 3Com End User Software License AgreementProduct Registration

710011, 710026, 710025, 710024, 3C985B-SX specifications

3Com, a pioneer in networking technology, has introduced several notable network interface cards (NICs) geared towards enhancing network performance and connectivity. Among these products are the 3Com 710011, 3C986-T, 3C985B-SX, 710026, and 710024, each designed with unique features to cater to various networking needs.

The 3Com 710011 is a 10/100 PCI Ethernet card that offers a reliable connection for desktop computers and servers. It features auto-sensing technology that allows it to automatically detect and adjust to the speed of the network, whether it’s 10 Mbps or 100 Mbps. This flexibility is crucial for environments where network demands can fluctuate. Additionally, the card supports full-duplex communication, enabling simultaneous data transmission and reception, thereby enhancing efficiency and reducing latency.

Next, the 3C986-T is a Gigabit Ethernet PCI card that stands out for its impressive performance capabilities. It supports speeds of up to 1000 Mbps, making it an excellent choice for environments requiring high bandwidth, such as data centers and enterprise networks. The 3C986-T is equipped with advanced features such as Jumbo Frame support, which allows for the transmission of larger packets, thus improving throughput and reducing CPU load. Furthermore, it is compatible with various operating systems, ensuring broad usability across different network setups.

The 3C985B-SX is another high-performance card designed for fiber optic connections. It supports 1000Base-SX standards, offering reliable connectivity over multimode fiber cables. This NIC is ideal for applications demanding high speed and long-distance data transmission, with a reach of up to 550 meters depending on the fiber used. With its low latency and high data integrity, the 3C985B-SX is well-suited for businesses that prioritize performance and reliability in their networking infrastructure.

The 710026 and 710024 models are additional offerings from 3Com, featuring robust technology to support various networking applications. The 710026 is specifically designed for wireless networking needs, providing seamless connectivity to Wi-Fi networks while supporting advanced security protocols to safeguard data transmission. On the other hand, the 710024 is optimized for desktop users, providing a cost-effective solution for connecting to wired networks with reliable performance at 10/100 Mbps.

In summary, these NICs from 3Com, including the 710011, 3C986-T, 3C985B-SX, 710026, and 710024, exemplify the company’s commitment to delivering high-performance networking solutions. With features tailored for various applications, from Gigabit Ethernet support to wireless connectivity, these cards are essential for businesses looking to enhance their network efficiency and reliability.
Top Page Image Contents