ADTRAN 1000 Installation, Maintenance, Specifications, Warranty and Customer Service

Page 2

2. INSTALLATION

C A U T I O N !

SUBJECT TO ELECTROSTATIC DAMAGE

OR DECREASE IN RELIABILITY.

HANDLING PRECAUTIONS REQUIRED.

After unpacking the unit, inspect it for damage. If damage is noted, file a claim with the carrier, then contact ADTRAN. Refer to Warranty and Customer Service.

The Total Access 1000 DSLAM ATM PSU inserts directly into the common card area in the position labeled PSU.

To install the PSU, grasp the unit by the front panel while supporting the bottom side. Align the card edges to the guide grooves and insert the unit until the edge connector seats firmly into the backplane. Lock the card in place by pushing in on the lock levers.

Provisioning Options

The Total Access 1000 DSLAM Local Power ATM PSU has no options or adjustments. It does not require provisioning prior to insertion into the channel bank.

Front Panel LED

The front panel LED will indicate GREEN when proper local power voltage is present and system voltages are present. An off LED indicates the loss of a system voltage.

Compliance Codes

Table 1 shows the Compliance Codes for the Total Access 1000 DSLAM Local Power ATM PSU. This product is intended to be installed in a Total Access 1000 Chassis providing a Type “B” or “E” enclosure, with Restricted Access.

Table 1. Compliance Codes

Code

Input

Output

 

 

 

Power Code (PC)

C

C

Telecommunication Code (TC)

X

Installation Code (IC)

A

 

 

 

3. MAINTENANCE

The Total Access 1000 DSLAM Local Power ATM PSU does not require routine maintenance for normal operation.

Field Repairs

ADTRAN does not recommend that repairs be attempted in the field. Repair services are obtained by returning the defective unit to ADTRAN Customer Service Department.

4. SPECIFICATIONS

Refer to Table 2 for Total Access 1000 DSLAM Local Power ATM PSU Specifications.

5. WARRANTY AND CUSTOMER SERVICE

ADTRAN will replace or repair this product within ten (10) years from the date of shipment if it does not meet its published specifications or fails while in service. Refer to ADTRAN U.S. and Canada Carrier Networks Equipment Warranty, Document 60000087-10.

Contact Customer and Product Service (CAPS) prior to returning equipment to ADTRAN.

For service, CAPS requests or further information, contact one of the following numbers:

ADTRAN Sales

Pricing and availability (800) 827-0807

ADTRAN Technical Support

Pre-sales Applications/Post-sale Technical Assistance (800) 726-8663

Standard support hours:

Monday-Friday, 7 a.m. - 7 p.m. CST

Emergency support:

7 days/week, 24 hours/day

ADTRAN Repair/CAPS

Return for repair / upgrade (256) 963-8722

Repair and Return Address:

ADTRAN, Inc.

CAPS

901 Explorer Boulevard

Huntsville, Alabama 35806-2807

2

61179018L1-5A

Image 2
Contents General ContentsTables Specifications InstallationMaintenance Warranty and Customer ServiceSpecifications Power61179018L1-5A