ADTRAN 1204006L2 quick start Features, Compliance, Physical, Pin, Description

Page 1

®

Quick Start Guide

For more detailed documentation, visit us online at www.adtran.com.

NetVanta ISDN BRI Dial Backup Interface Module (DIM)

P/N 1200865L1

 

 

SLOT 1 NET/D BU

WAN--DDST1 DSX-1

DBU

SPECIFICATIONS

LAN

CONSOLE

 

INSTALLATION INSTRUCTIONS

1.Remove power from the base unit.

2.If the Network Interface Module (NIM) is already in the NetVanta chassis, remove all cables from the module and release the pins at both edges of the NIM faceplate and slide the module out of the chassis.

3.Carefully align the P1 connector on the NIM with the J1 connector on the ISDN BRI DIM. Using only fingertip pressure so that neither circuit board bends or flexes, ensure that the connectors are firmly seated.

Secure the ISDN BRI DIM to the NIM using the screws and standoff posts supplied.

4.Slide the NIM with the ISDN BRI DIM attached into the NetVanta option slot until the NIM is firmly seated against the chassis.

5.Secure the pins at both edges of the NIM.

6.Connect the cables to the associated device(s)

7.Complete installation of the base unit.

8.Restore power to the base unit.

Features

Clear channel and bonding mode 1 call protocols

 

 

Network support for 64 kbps (1 B-channel)

 

 

D-channel switch compatibility with AT&T 5ESS,

 

 

Northern Telecom DMS-100, and National ISDN-1

 

 

V.54 network loopback support

Compliance

FCC Part 15 Class A, EN 55022 Class A, EN 55024

 

 

EN 61000-3-2, EN 61000-3-3

 

 

ACTA/FCC Part 68, IC CS-03,

 

 

UL/CUL 60950

Physical

Dimensions: 2.5-inch W x 3.75-inch D

 

 

Operating Temperature: 0°C to 50°C

 

 

Storage Temperature: -20°C to 70°C

 

 

Relative Humidity: Up to 95 percent, noncondensing

 

 

 

 

 

NetVanta modules should be installed only in

 

 

NetVanta Series products.

 

 

 

 

 

 

 

For NetVanta modules with outside plant connections, ensure that all cables are removed from the module before installing or removing it from the NetVanta chassis.

ISDN BRI DBU CONNECTION PINOUTS

Pin

Name

Description

 

 

 

1-3

Unused

4

R

Network-Ring

5

T

Network-Tip

6-8

Unused

Important: For additional details on product features, specifications, installation, and safety, refer to the appropriate Hardware Installation Guide on the ADTRAN OS System Documentation CD shipped with the base unit and available online at www.adtran.com.

Quick Start Guide, 61200865L1-13E, July 2006

Technical Support 1-888-4ADTRAN (1-888-423-8726)

Copyright © 2006 ADTRAN, All Rights Reserved

Image 1
Contents Compliance FeaturesPhysical PinBonding txcid-timer seconds Bonding txadd-timer secondsBonding txdeq-timer seconds Bonding txfa-timer seconds