3Com 3CRWE875075A, 3CRWE850075A, 3CRWE825075A manual Field Default Description

Page 32

Configure the options as described below. When you are finished, click Apply.

n

n

MAC Authentication— Selecting MAC authentication allows you to define access permission and precedence. Options are:

Local MAC— With this option, the MAC address of the associating station is compared against the local access control list. You must build this list (called the MAC Authentication Table) as described in Local MAC Authentication below. Use this option if you want to restrict wireless clients authentication to the access point based off their MAC address.

RADIUS MAC— With this option, the MAC address of the associating station is sent to the configured RADIUS server for validation. You must specify the authentication sequence and the corresponding parameters for the remote authentication protocol. See “RADIUS” on page 30 and “802.11x Setup” below.

Disable— No MAC address related checks are performed on a client requesting authentication to the access point.

802.1x Setup—802.1x is designed to enhance the security management of the wireless network. Select one of the following options:

Disable— The access point will neither initiate nor respond to any 802.1x authentication requests to or from wireless clients.

Supported — Legacy clients (non 802.1x) and 802.1x clients are both supported. This is provided for ease of migration. This option works with WPA key management set to either “WPA authentication over 802.1x” or “WPA pre-shared key (PSK)” on the radio security page.

Required — Clients authenticate to a RADIUS server via the access point. Clients are not allowed onto the wired LAN until authentication is successful. If two Radios are installed and WPA is being used, both radios’ security must be set to “WPA authentication over 802.1x” for the WPA key management when 802.1x is Required. If one radio’s security is set to “WPA pre-shared key (PSK)” for WPA key management and the other is “WPA authentication over 802.1x”, then the 802.1x Setup must be set to “Supported” instead.

When 802.1x is enabled, the broadcast and session key rotation intervals can also be configured. Set these values to force the periodic refresh of broadcast or session keys for each 802.1x client.

First set up the RADIUS authentication for the client on the RADIUS authentication server. (See “RADIUS” on page 30.) Select Supported or Required on the 802.1x Setup field above. Enter data as described in the following table.

Field

Default

Description

 

 

 

Broadcast Key Refresh Rate

0

Defines how long the RADIUS server will

 

(minutes)

refresh the primary broadcast key.

32

Image 32
Contents Wireless LAN Access Points 8250/8500/8750 3Com Corporation 350 Campus Drive Marlborough, MA Contents System Configuration Regulatory Compliance Information Index Product Features IntroductionManageability SecurityPerformance and Reliability HIGH-PERFORMANCE 802.11A Wireless Network StandardsFAR-REACHING 802.11G Infrastructure Wireless LAN Network Configuration and PlanningAD HOC Wireless LAN Infrastructure Wireless LAN for Roaming Wireless PCSTerminology Page Installing the Access Point Installation RequirementsPower Requirements Safety InformationPage Connecting the Standard Antennas Before YOU BeginConnecting Power Using the Power Supply Mounting on a Wall Using a POWER-OVER-ETHERNET LAN PortChecking the Leds Plastic anchors and 3 screws Flat Surface Installation Selecting and Connecting a Different Antenna Model Power Settings on the Access Point for External Antennas USAInstalling Software Utilities Using the 3COM Wireless Device Manager Launching a Wireless Device ConfigurationClick Configure Using the PRE-IP Configuration Wizard Configuration LoginSetting the Country Code Basic Setup Dhcp Client Advanced SetupIdentification Radius Secure WEB Server ConnectionAuthentication Field Default Description Filter Control Parameter DescriptionFiltering by Vlan Security FiltersFiltering by Ethernet Protocol Type Client List TimeoutUplink Port MAC Address Filtering Administration SnmpBackup Configuration System LOG StatusRadio Settings Radio InterfacePage Configuring Authentication SecurityWPA Configuration Configuring EncryptionWEP Configuration HOW to Setup the Access Point for Radius Authentiction Select Advanced SetupEncryption is Enabled HOW to Setup the Access Point for WPA with PRE-SHAREDPSK KEYWPA Configuration for Windows XP WPA AES Troubleshooting Click Configure Client service area to match Where to GO for Help Troubleshoot Online Obtaining Support for Your ProductAccess Software Downloads Contact US Telephone Technical Support and RepairCountry Telephone Number North America Telephone Regulatory Compliance Information Industry Canada IC Emissions Compliance Statement Additional Country Restrictions WL-463, 802.11g Radio Module Safety Compliance Notice Index Radius TCP/IP
Related manuals
Manual 8 pages 29.84 Kb

3CRWE875075A, 3CRWE850075A, 3CRWE825075A specifications

The 3Com 3CRWE850075A, 3CRWE875075A, and 3CRWE825075A are high-performance wireless networking devices that cater to the needs of small to medium-sized businesses, educational institutions, and similar environments. These Wireless LAN access points stand out due to their robust features, scalability, and advanced technologies, ensuring reliable connectivity and high data throughput.

The 3CRWE850075A is designed for the commercialization of high-speed Internet access and multimedia applications. It operates on the 802.11g standard, providing data rates of up to 54 Mbps. Utilizing MIMO (Multiple Input Multiple Output) technology, it effectively doubles the throughput by employing multiple antennas both at the transmitter and receiver ends. This results in improved signal quality and range, ensuring users maintain a strong connection even in high-density environments.

The 3CRWE875075A takes connectivity a step further, supporting both 802.11g and 802.11b standards while providing backward compatibility. It offers a sleek configuration that supports multiple SSIDs, enabling secure guest access while maintaining network integrity. This model is particularly proficient in dealing with heavy traffic situations, ensuring consistent performance across various applications, from data transfer to VoIP services.

The 3CRWE825075A is a versatile access point that excels in providing comprehensive coverage in larger environments. Its unique feature set includes Power over Ethernet (PoE) capabilities, allowing easy deployment in locations without power outlets. This makes installation more flexible and economical. Furthermore, it supports WPA/WPA2 encryption protocols for enhanced security, ensuring the protection of sensitive data transmitted over the network.

All three models prioritize ease of management with web-based interfaces, allowing network administrators to configure and monitor the access points effortlessly. They support Quality of Service (QoS) features, enabling the prioritization of critical applications and enhancing overall user experience during peak usage times.

In summary, the 3Com 3CRWE850075A, 3CRWE875075A, and 3CRWE825075A access points feature advanced wireless technologies, scalable options, and robust security measures designed to meet the demands of modern networking needs. These devices are suitable for various organizational scenarios, providing seamless connectivity, high performance, and reliability, making them essential components in today’s wireless communication infrastructure.