Quick Setup
WebUI Configuration example
STEP 1:
Connect both the Administrator’s PC and the Internal (LAN) port of the Firewall VPN Router Firewall to a hub or switch. Make sure there is a link light on the hub/switch for both connections. The Firewall VPN Router has an embedded web server used for management and configuration. Use a web browser to display the configurations of the firewall (such as Internet Explorer 4(or above) or Netscape 4.0(or above) with full java script support). The default IP address of the firewall is 192.168.1.1 with a subnet mask of 255.255.255.0. Therefore, the IP address of the Administrator PC must be in the range between 192.168.1.2 /24– 192.168.1.254/24.
If the company’s internal IP Address is not subnet of 192.168.1.0, (i.e. Internal IP Address is 172.16.0.1) the Administrator must change his/her PC IP address to be within the same range of the internal subnet (i.e. 192.168.0.0). Reboot the PC if necessary.
By default, the Firewall VPN Router is shipped with its DHCP Server function enabled. This means the client computers on the internal (LAN) network including the Administrator PC can set their TCP/IP settings to automatically obtain an IP address from the Firewall VPN Router.
The following table is a list of private IP addresses. These addresses may not be used as an External IP address.
10.0.0.0~ 10.255.255.255
172.16.0.0~ 172.31.255.255
192.168.0.0 ~ 192.168.255.255
- 5 -