Hardware Installation, Software Installation

Hardware Installation

This chapter describes how to install the ECR500 ExpressCard to your computer.

When you connect the ECR500 card to the PCI-Express Slot, the PC Card has the ability of automatic sensing and operating on either speed without manual reconfiguration.

1.Hold the ExpressCard with wide connector toward the slot and the brand label facing upward.

2.Insert the ExpressCard and push it firmly into the ExpressCard slot of your computer.

3.Check the Power Led status is on, and then you can insert the memory card into the ECR500 memory card slot.

Figure2 Power LED

Software Installation

Windows 2000/XP/2003 Installation

Windows 2000, XP and Server 2003 automatically detects and installs the correct driver for the 5-in-1 ECR500 ExpressCard. No driver installation is needed.