Abocom WUG2700 user manual Auto STA will dynamically change as AP

	Auto: STA will dynamically change as AP
	announcement.
	On: Always send frame with protection.
	Off: Always send frame without protection.
Preamble	Preamble frames. Long preamble (128 bits sync field)
	and short preamble (56 bits sync field) are supported.
	The system default is long preamble.
Beacon (ms)	The time between two beacons. The system default is
	100 ms.
TX Power	Manually force the AP transmits power. The system
	default is 100%.
TX Rate	Manually force the Transmit using selected rate. The
	system default is auto.
Channel	Manually force the AP using the channel. The system
	default is CHl-1.
Auth. Vs. Security	Authentication mode and encryption algorithm used
	within the AP. The system default is no authentication
	and encryption.
TX Burst	Place a check in the check box to enable the TX Burst
	function.
No forwarding among	No beacon among wireless client, clients can share
wireless clients	information each other. The system default is no
	forwarding.
Hide SSID	Do not display AP name. System default no hide.
Use Short Slot	Slot time. Short slot time is 9 us, long slot time is 20 us.
	System default is long slot time.
Auto Channel Selected	System will make a random channel at the next boot
at next boot	(PCI device only).
Default	Use the system default value.
Apply	Click to apply the above settings.

- 33 -