Addlogix Wireless PC2TV InternetVue 2100 | Version 0.2 |
2
Hardware Setup
2.1 Attaching InternetVue 2100 to a Television or Monitor
1.Connect a DVI or VGA cable to the appropriate DVI or VGA port on the InternetVue 2100.
2.Connect the other end of the cable to the appropriate DVI or VGA port on the television, projector or monitor.
3.To enable audio, connect a stereo cable from the television, monitor or external speakers to the stereo jack connector on the InternetVue 2100.
4.To enable access to the Internet (optional), connect a network cable to the 10/100M Ethernet port on the InternetVue 2100.
5.Connect the power supply to the power port on the InternetVue 2100.
6.After connecting power, the television or monitor to which the Internet 2100 is attached shows the PC2TV screen, This indicates that the InternetVue 2100 is connected.
Figure 2:InternetVue 2100 Splash Screen
Note the screen contains a display ID.
This display ID, also known as the SSID, is unique to each InternetVue 2100. The SSID is needed to connect your computer to the InternetVue 2100.
6