Destination drive

Installing Windows 98SE or Me using the Addonics USB CD- ROM, DVD-ROM, DVD/CDRW or DVD-R/RW drive.

The procedures are practically identical to Windows 2000 or XP as described above. Except instead of copying the I386 folder to the hard drive, you will copy the Windows 98SE folder or the Windows Me folder to the hard drive.

1.First, follow step 1 through 10 above. Make sure you have enough space in your local hard drive. At least 2Gb or higher.

2.If everything went well, you should have a drive R:\ for the CDROM drive.

3.At the prompt, go to the C:\drive by typing “C: then enter”

4.At the Local Drive C:\drive, create a Folder name. For example at the C:\prompt type “MD 98” doing this will create a folder name “98” on your local hard drive.

5.Now type “R: then enter” to go to the R:\drive

6.At the R:\prompt type the following “Path=A:" then press enter

7.Now type “Xcopy . /s C:\98" then press "Enter” (There is a space between Xcopy and the dot)

8.Once the copy process is completed, go to the C:\drive. Open the folder you have created, in this case it is the 98 folder. For example: from the C:\prompt type “CD 98" then press "Enter”

9.Now go to the 98 folder type "CD win98" then "Enter", from the C:\win98 type "Setup" and "enter".

10.Installation should now start. Follow instruction from your Operating System manual on how to install the OS. (Installation will take some time, Please be patient)

Using USB floppy or other equivalent of removable storage device.

If your system does not have a built-in floppy drive, you may use a USB floppy, ZIP drive, CD or USB hard drive. But your system BIOS must have support for booting from USB floppy, ZIP, CD-ROM or hard drive. Make sure the media that you use to boot the system contains all the files from the dosboot.img in step 5.

Addonics Technologies – Pocket CD-ROM Users Guide v 5.0