Advantek Networks ALN-328R Hardware Installation Instructions, Minimum System Requirements

1.2 Minimum System Requirements

zPentium compatible processor 200 MHz and above

z32 MB system memory or more

z30 MB free space on your hard drive

zCD-ROM drive

zOne available PCI slot

zWindows NT4.0, Windows 98/98SE, Windows ME, Windows 2000, Windows XP, Windows Vista, Windows 7, or Linux OS.

1.3Package Contents

zOne Gigabit PCI Adapter

zOne Installation CD-ROM

zOne WOL Cable (for product with WOL function only)

If any of above items is missing or damaged, please contact your local dealer immediately.

2. Hardware Installation Instructions

1)Turn off computer and remove its cover.

2)Insert the contact edge of the adapter card into the connector of any available PCI Bus master expansion slot. Press the card firmly into the connector to PCI slot. Please make sure the card’s contacts are fully seated in the PCI slot.

3)Install the bracket screw that secures the card to the Computer chassis.

4)Replace the computer’s cover.

5)Connect the Gigabit NIC card to the network with Ethernet Cable and turn on the computer.

6)After computer is restarted, the “Found New Hardware” window will appear. Please click “Cancel” to close this window and insert the Installation CD into the CD-ROM. Follow the section 3 “Software Driver Installation” to setup the device driver.

4