05. Getting Started your Wireless Duo
A. Basic Operation
Power button: Press 3 seconds to turn on/off
Status | Power Indicator | |
Booting | N/A | Fast Blinking White |
System / | N/A | Solid White |
|
|
|
Wireless Data Transmitting | Blinking Blue | Solid White |
Shutting Down | Blinking Blue | Blinking White |
System Abnormal | N/A | Solid Orange and White |
Battery Status | N/A | Charging |
|
| Charging: Solid Orange |
|
| Full charged: N/A |
|
| Working: |
|
| Battery <10% Blinking Orange |
|
| Battery >10% Solid White |
F/W Upgrade | N/A | Slow Blinking Orange |
|
|
|
Reset hole: |
| SD card reader: |
If you would like to revert the device to its factory default configuration, press and hold the reset button for 10 seconds. Please note that this will not format the data stored in the device.
You can process
*DAS mode:
When connect Wireless Duo to a computer via USB cable, it will switch to DAS mode automatically. Under DAS mode,
B. Connect to a computer
-Connect your Wireless Duo to a computer via a USB cable that came with the device to switch to DAS mode.Under DAS
-Drag the files you wish to backup from the connected computer and drop them into your Wireless Duo. When connecting to a computer, Wireless Duo works like any standard external hard drive. In this mode (DAS mode), Wireless Duo does not broadcast a wireless signal. You cannot access the drive from other mobile devices.
-After finishing loading contents, please safely remove your Wireless Duo from your computer.
- 03 -