3.1OSD (On-Screen Display) menu
3.1.1How to reconfigure
1.Touch the sensor to activate the OSD menu.
2. | Touch | and | to navigate through the functions. Highlight and activate | ||||
| the desired function by touching the | sensor. If the function selected has | |||||
| a | and | again to navigate through the | ||||
| functions. Highlight and activate the desired | ||||||
| the | sensor. |
|
|
|
|
|
3. | Change the settings of the selected function by touching | and | or | ||||
| moving your finger along the |
|
|
|
4.To exit the OSD menu, touch the sensor. Repeat step 2 and step 3 to adjust any other function.
3.1.2OSD function introduction
See the table on the next page for details.
• Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows horizontal disturbances.
•Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the image is not proportional.
•ASCR (ASUS Smart Contrast Ratio) function allows the monitor to enhance dynamic contrast ratio during video playback.
ASUS PG221 LCD Monitor | 3- |