3.Image
You can adjust the image Sharpness, Trace Free, Aspect Control, ASCR, Position (VGA only), and Focus (VGA only) from this main function.
| PB278 |
|
| |
| Splendid |
| Sharpness | 50 |
| Color |
| Trace Free | 60 |
| Image |
| Aspect Control | Full |
| Sound |
| ASCR | OFF |
|
| |||
| Input Select |
| Position |
|
|
|
| ||
| System Setup |
| Focus |
|
|
|
| AUTO Adjust. |
|
|
|
|
|
|
| Move | Menu | Exit | |
|
|
|
|
|
•Sharpness: Adjust the picture sharpness. The adjusting range is from 0 to 100.
•Trace Free: Speed up the response time by Over Drive technology. The adjusting range is from lower 0 to faster 100.
•Aspect Control: Adjust the aspect ratio to “Full”, “4:3”, “1:1”, or “Over Scan”. (The “4:3” ratio is only for 4:3 or 5:4 image source.
The “Over Scan” ratio is only available for HDMI input.)
•ASCR: Turn on or off the ASCR (ASUS Smart Contrast Ratio) function. (Only available at Scenery Mode and Theater Mode.)
•Position: Adjust the horizontal position
•Focus: Reduce
•AUTO Adjust.: Automatically adjust the image to its optimized position, clock, and phase. (Only available for VGA input.)
• Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows horizontal disturbances.
•Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the image is not proportional.
ASUS LCD Monitor PB278Q Series |