Asus MK221 user manual Image, Color

Page 18

2.Image

You can adjust brightness, contrast, ASCR, Trace Free, sharpness, saturation, position (VGA input only), and focus (VGA input only) from this main function.

•Brightness: the adjusting range is from 0 to 100. is a hotkey to activate this function.

•Contrast: the adjusting range is from 0 to 100.

•ASCR: turns on/off the ASCR (ASUS Smart Contrast Ratio) function.

•Trace Free: turns on/off the Trace Free function.

•Sharpness: the adjusting range is from 0 to 100.

•Saturation: the adjusting range is from 0 to 100.

•Position: adjusts the horizontal postition (H-Position) and the vertical position (V-Position) of the image. The adjusting range is from 0 to 100.

•Focus: reduces Horizonal-line noise and Vertical-line noise of the image by adjusting (Phase) and (Clock) separately. The adjusting range is from 0 to 100.

• Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows horizontal disturbances.

•Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the image is not proportional.

3.Color

Select the image color you like from this function.

•Color Temp.: contains five color modes including Cool, Normal, Warm, sRGB, and User mode.

•Skin Tone: contains three color modes including Reddish, Natural, and Yellowish.

In the User mode, colors of R (Red), G (Green), and B (Blue) are user- configurable; the adjusting range is from 0-100.

10

ASUS MK221 Series LCD Monitor

Page 17 Page 19
Image 18
Page 17 Page 19
Contents MK221 Series LCD Monitor E3647 First Edition February Copyright 2008 ASUSTeK Computer INC. All Rights ReservedContents Federal Communications Commission Statement Canadian Department of Communications StatementSafety information Care & Cleaning Following symptoms are normal with the monitorConventions used in this guide Where to find more information Asus websites Optional documentationViii Package contents WelcomeControl panel Monitor introductionFront view ButtonSide Rear connectorsBack view Status DescriptionAdjusting the monitor Assembling the monitor baseDetaching the arm/base For Vesa wall mount Connecting the cables Turning on the monitorConnect the cables as shown Built-in webcam with Mic Array support Using the deviceWebcam is adjustable upward and downward as shown 30˚-30˚ System requirementsInstallation instructions LifeFrame 2 softwareOSD Function Introduction How to reconfigureOSD On-Screen Display menu Press the Menu button to activate the OSD menuImage ColorInput Select System SetupOSD Setup Select from VGA, DVI, and Hdmi input sources MK221H onlySpecifications summary Viewing angleH/V CR10 Display colors Response timeAccessories Regulation approvals Troubleshooting FAQ ProblemPossible Solution Vertical Frequency Supported operating modesStandard PixelAsus MK221 Series LCD Monitor
Top Page Image Contents