Asus ML249 manual Connecting the cables, Turning on the monitor, To connect the power cord

Page 14

2.3Connecting the cables

1.Connect the cables as the following instructions:

•To connect the power cord:

a.Connect the power adapter securely to the monitor’s DC input port.

b.Connect one end of the power cord to the power adapter and the other end to a power outlet.

•To connect the VGA/HDMI-DVI cable:

a.Plug one end of the VGA/HDMI-DVI cable to the monitor’s VGA/HDMI port.

b.Connect the other end of the VGA/HDMI-DVI cable to your computer's VGA/DVI port.

c.Tighten the two screws to secure the VGA/DVI connector.

•To use the earphone (only when an HDMI cable, not the supplied HDMI- DVI cable, is connected): connect the end with plug type to the monitor’s earphone jack.

When these cables are connected, you can choose the desired signal from the Input Select item in the OSD menu.

2.4Turning on the monitor

Tap the power button . See page 1-2 for the location of the power button. The power indicator lights up in white to show that the monitor is ON.

ASUS ML249 Series LED Monitor

2-3

Page 13 Page 15
Image 14
Page 13 Page 15
Contents User Guide E6236 First Edition January Contents Federal Communications Commission Statement Canadian Department of Communications StatementSafety information Conventions used in this guide Care & CleaningFollowing symptoms are normal with the monitor Where to find more information Asus websites Optional documentationPackage contents WelcomeMonitor introduction Front viewKensington lock slot Rear connectorsBack view Product introduction Assembling the monitor arm/base Adjusting the monitor Turning on the monitor Connecting the cablesTo connect the power cord To connect the VGA/HDMI-DVI cableSetup OSD function introduction How to reconfigureOSD On-Screen Display menu SplendidColor ImageInput Select System SetupOSD Setup Specifications summary ML249H TFT LCDTroubleshooting FAQ Possible SolutionSupported operating modes Pixel
Top Page Image Contents