Asus M2NPV-MX manual PCIPnP, Plug & Play O/S No, Primary Display Adapter PCI-E, IRQ Resources

2.4.5PCIPnP

Phoenix-Award BIOS CMOS Setup Utility

Advanced

	PCIPnP		Select Menu
	Plug & Play O/S	[No]	Item Specific Help
	Primary Display Adapter	[PCI-E]
	Resources Controlled By	[Auto]	Select Yes if you are
			using a Plug and Play
x IRQ Resources
			capable operating system
	** PCI Express relative itmes **		Select No if you need the
	Maximum Payload Size	[4096]	BIOS to configure non-boot
			devices

Plug & Play O/S [No]

When set to [No], the BIOS configures all the devices in the system. When set to [Yes] and if you install a Plug and Play operating system, the operating system configures the Plug and Play devices not required for boot. Configuration options: [No] [Yes]

Primary Display Adapter [PCI-E]

Sets which graphics controller to use as primary boot device. Configuration options: [PCI] [Onboard] [PCI-E]

Resources Controlled By [Auto]

When set to [Auto], the BIOS automatically configures all the boot and Plug and Play compatible devices. Set to [Manual] if you want to assign the IRQ DMA and memory base address fields.

Configuration options: [Auto] [Manual]

When the item Resources Controlled By is set to [Auto], the item IRQ Resources is grayed out and not user-configurable. Refer to the section “IRQ Resources” for information on how to enable this item.

IRQ Resources

This sub-menu is activated only when the Resources Controlled By item is set to Manual.

Phoenix-Award BIOS CMOS Setup Utility

Advanced

			IRQ Resources			Select Menu
IRQ-5	assigned to			[PCI Device]	Item Specific Help
IRQ-7	assigned to			[PCI Device]
IRQ-9	assigned to			[PCI Device]	Legacy ISA for		devices
IRQ-10		assigned to		[PCI Device]	compliant with		the
IRQ-11		assigned to		[PCI Device]
					original PC AT		bus
IRQ-14		assigned to		[PCI Device]
IRQ-15		assigned to		[PCI Device]	specification,		PCI/ISA
					PnP for devices
					compliant with		the

ASUS M2NPV-MX 2 - 25