2.3Detaching the arm (for VESA wall mount)
The detachable arm of this monitor is specially designed for VESA wall mount.
To detach the arm:
1.Disconnect power and signal cables.
2.Lower the monitor to its lowest height, and then insert the height adjustment lock.
3.Carefully put the front of the monitor face down on a flat and clean table.
4.Use a screwdriver to remove the four screwdrivers on the arm (Figure 1), and then detach the arm from the monitor (Figure 2).
• We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.
•Hold the stand while removing the screws.
• The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load 28 kg (Screw size: M4 x 12 mm).
Chapter 2: Setup |