Choose a convenient mounting location with unobstructed airflow.
The Q amplifiers feature four plastic mounting tabs located at the amplifiers four corners. You will need to remove the
Using the supplied screws, gently mount the amplifier in to position. Do not over tighten the screws.
All Q series amplifiers come with three molded acrylic covers in red, blue and orange. The cover is held down with four thumb screws. The amplifier crossover and gain controls are located under the cover. Please note that the length of the four thumb screws are different, there are two short ones and two long ones. The shorter screws are for the lower shelf of the acrylic cover, while the longer screws fit the raised shelf area of the acrylic cover.
There is an area of multiple white neon LED bulbs underneath the cover which transmit the light through the cover. By simply changing the cover you can change your amplifier installation color to either blue, red or orange.
Please take special care not to scratch the surface of the acrylic covers. Clean them only with a soft damp towel. The use of any cleansers may scratch the surface and remove the silver stamping of the logo.
Replacement covers and thumb screws are available from Cadence.