Asus VE208, VE198 Connecting the cables, Turning on the monitor, To connect the VGA/DVI cable

Page 13

2.4Connecting the cables

1.Connect the cables as the following instructions:

VE198

VE208

Audio-in

VGA

Audio-in

VGA

To connect the audio cable: connect one end of the audio cable to the monitor’s Audio-in port, the other end to the computer's audio-out port.

To connect the power cord: connect one end of the power cord securely to the monitor’s AC input port, the other end to a power outlet.

To connect the VGA/DVI cable:

a.Plug the VGA/DVI connector to the LED monitor’s VGA/DVI port.

b.Connect the other end of the VGA/DVI cable to your computer's VGA/ DVI.

c.Tighten the two screws to secure the VGA/DVI connector.

When these cables are connected, you can choose the desired signal from the Input Select item of the OSD functions.

2.Gather all the cables with the cable management slot.

Cable management slot

2.5Turning on the monitor

Gently press the power button . See page 1-3 for the location of the power button. The power indicator lights up in blue to show that the monitor is ON.

ASUS VE198/VE208 Series LED Monitor

2-3

Image 13
Contents User Guide Contents Federal Communications Commission Statement Safety information Following symptoms are normal with the monitor Care & CleaningAsus websites Optional documentation Where to find more informationWelcome Package contentsFront view Monitor introductionBack view Product introduction Assembling the monitor base Adjusting the monitorDetaching the arm/base for Vesa wall mount Turning on the monitor Connecting the cablesTo connect the VGA/DVI cable Setup Spendid OSD On-Screen Display menuColor ImageOSD Setup System SetupInput Select TFT LCD Specifications summary VE208TSpecifications summary VE208N Specifications summary VE208S Specifications summary VE208D Specifications summary VE198T Specifications summary VE198N Specifications summary VE198S Specifications summary VE198D Possible Solution Troubleshooting FAQVE198 Supported operating modesVE208