5.Display
▪Aspect Ratio: to change the aspect ratio of the displaying image among Wide, Square, Zoom1, Zoom2, Panorama, and Auto
-Wide: to fit pictures to 16:9 wide full screen
-Square: to leave the left and right sides of the screen blank to display 4:3 format pictures
-Panorama: to fit the 4:3 signal into the 16:9 wide screen by keeping the centre of the picture in the same aspect ratio and stretching the both sides more
-Zoom1: to stretch the centre of 2.35:1 pictures to the top and bottom of the screen and leave the left and right sides of the picture outside the screen being
-Zoom2: to stretch the centre of 1.85:1 pictures to the top and bottom of the screen and leave the left and right sides of the picture outside the screen being
-Auto: to automatically select the screen aspect ratio according to the broadcasting signal
▪Auto Configuration: to automatically adjust the display parameters for VGA signal. This function is active only for VGA input.
This function can be activated also by pressing 
key on the key pad of the display set when VGA input in use.
▪Manual Configuration: to specify the display position, clock, and phase of the display for VGA signal. This function is active only when VGA input source is selected.
6.Time
▪Clock: to set the current time. This function is inactive when “Sync Time” is on.
▪Off Time: to specify the time when the display automatically turns off. The
▪On Time: to specify the time when the display automatically turns on. You can also specify the signal source and volume when it is turned on. The
▪Auto Off: to switch the display off when no signal from the input source is detected for 10 minutes.
▪Time Zone: to specify your time zone.
▪Sync Time: to automatically get time information from broadcasting signal
▪Sleep Timer: to set a countdown of 15, 30, 60, 90, 120, 180, 240 minutes till the display automatically switches off.
20 | ASUS LCD TV Monitor T1 Series |