Asus VS24AHP manual Detaching the arm/base for Vesa wall mount

Page 16

2.3Detaching the arm/base (for VESA wall mount)

The detachable arm/base of this monitor is specially designed for VESA wall mount.

To detach the arm/base:

1.Have the front of the monitor face down on a table.

2.Remove the rubbers in the four screw holes. (Figure 1)

3.Remove the base (Figure 2).

4.Pry the rear hinge cover (Figure 3).

5.Use a screwdriver to remove the four screws on the hinge (Figure 4), then remove the hinge.

	1
	2
Figure 1	Figure 2
Figure 3	Figure 4

We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.

2-2	Chapter 2: Setup

Image 16

Contents User Guide E6235 First Edition January Contents Federal Communications Commission Statement Canadian Department of Communications StatementSafety information Following symptoms are normal with the monitor Care & CleaningConventions used in this guide Where to find more information Takeback ServicesAsus websites Optional documentation Viii Package contents WelcomeMonitor introduction Front viewBack view Rear connectorsKensington lock slot QuickFit Function Photo 4x6, 3x5 Photo 8x10 Product introduction Adjusting the monitor Assembling the monitor arm/baseDetaching the arm/base for Vesa wall mount Turning on the monitor Connecting the cablesTo connect the VGA/HDMI/DVI cable Setup How to reconfigure OSD On-Screen Display menuOSD function introduction SplendidColor ImageOSD Setup System SetupInput Select Specifications summary TFT LCDTroubleshooting FAQ Possible SolutionSupported operating modes MHz