2.2Detaching the arm/stand
(for VESA wall mount)
The detachable stand of the VW19 Series LCD monitor is specially designed for VESA wall mount.
To detach the arm/stand:
1.Have the front of the monitor face down on a table.
2.Use a screwdriver to remove the screw on the stand of the monitor as the below drawing shows.
•We recommend that you cover the table surface with soft cloth to
prevent damage to the monitor.
•Hold the stand of the monitor when you remove the screw.
screw
The VESA wall mount kit (100 mm x 100 mm) is purchased separately.
2 - 2 | Chapter 2: Setup |