Carson SA-450-80 PG SA-450-80 Specifications, Input Power, Siren Mode Output Power, Cycle Rates

Page 2

 

SA-450-80 SPECIFICATIONS

INPUT POWER:

11-16 Volts DC, 8 Amps DC

SIREN MODE

 

 

OUTPUT POWER:

105 Watts RMS

(15 VDC input, 100W speaker)

AUDIO MODE

 

 

OUTPUT POWER:

40 Watts RMS

(14 VDC input, 100W speaker)

SIREN

 

 

FREQUENCY:

450Hz - 1500Hz Nominal

CYCLE RATES:

WAIL - 14 cycles/min

 

YELP - 190 cycles/min

AUDIO

PHASER - 15 cycles/sec

 

 

RESPONSE:

200Hz - 10KHz +/-3db

 

Harmonic Distortion Less than 3% @ 1KHz

RADIO INPUT

 

 

SENSITIVITY:

0.75VAC Input Min. for 40 Watts RMS Output

OPERATING

 

 

TEMPERATURE:

-15° F to +140° F

SIZE:

5-1/8" Wide X 2-3/8" High X 5-7/8" Deep

WEIGHT:

4 pounds

 

NIGHT VISIBILITY:

Backlit front control panel when power is on

PROTECTION:

High Voltage – Siren output stops with input voltage above highest rating

 

Stops high output power from blowing speaker

 

Reverse Polarity - Fuse blows when power is wired backwards

 

Shorted Output – Fuse blows if speaker shorts (a common problem)

NOTICE

Due to continuous product improvements, we must reserve the right to change any specifications and information, contained in this manual at any time without notice.

Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.

Carson Manufacturing Co., Inc. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this manual.

TB0329B

Page 2 of 7

10/18/03

Image 2
Contents Technical Bulletin Siren Mode Output Power SA-450-80 SpecificationsInput Power Audio Mode Output PowerMounting InstallationSafety Precautions Wiring Harness Connections Electrical ConnectionsOperation Symptom Possible Cause Check ServiceProblems ReturnParts Description