Philips FW-D550 manual Functional Overview, Controls on the system

Functional Overview

Controls on the system

1ECO POWER

–to switch the system on or to Eco Power Standby mode.

2 STANDBY ON2

–to switch the system on or to Standby mode.

3 DISPLAY SCREEN

–to view the current status of the system.

4 DISC TRAYS

5 DISC CHANGE

–to change disc(s).

6DISC 1 / DISC 2 / DISC 3

–to select a disc tray for playback.

7 OPEN•CLOSE

–to open or close the disc tray.

8 INTERACTIVE VU METER

–to show the VU (volume unit) meter in music or volume mode depending on the display mode selected.

9SENSOR

–point the remote control towards this sensor.

0 VOLUME

–to increase or decrease the volume.

!Tape Deck Operation

AUTO REPLAY

–to select continuous playback in either AUTO PLAY or ONCE mode only.

DUBBING

–to dub a tape.

REC

–to start recording on tape deck 2.

@VOCAL

–to fade out the original vocal from Karaoke or to switch between mono or stereo mode during audio disc playback.

#JOG CONTROL

–to select the desired sound effect for the selected sound feature.

$KEY CONTROL

–to change the tone level to suit your vocal range.

I .................to decrease the key tone level. .................to restore the key tone level to

original setting.

i .................to increase the key tone level.

%ECHO

–to adjust the echo level for karaoke after inserting the microphone.

^SOUND

–to activate or deactivate the surround sound effect.

&MAX SOUND (MAX)

–to activate or deactivate the optimal mix of various sound features.

*MIC/LEVEL

–to connect microphone jack.

–to adjust the mixing level for karaoke or microphone recording.

(0

–to open the tape deck door.

) TAPE DECK 1 ¡ TAPE DECK 2 ™ SOURCE

–to select the following:

DISC (DISC 1•2•3)

–to select disc tray 1, 2 or 3

TUNER (BAND)

–to select waveband: FM or MW.

TAPE (TAPE 1-2)

–to select tape deck 1 or 2.

AUX/TV

–to select a connected external source:TV/CDR or AUX (auxiliary) mode.

£Mode Selection

PLAY/PAUSE 38

for DISC	to start or interrupt playback.
for TAPE	to start playback.
for PLUG&PLAY ...	(on the system only) to initiate
	plug & play mode.
SEARCH•TUNING 1 ¡
(ALBUM – / +)
for DISC	to search backward/forward.
for TAPE	to rewind or fast forward.
for TUNER	to tune to a lower or higher
	radio frequency.
for CLOCK	(in standby mode)to set the
	minute and hour.
DEMO STOP/CLEAR 7
for DISC	to stop playback or to clear a
	programme.
for DEMO	(in Standby or ECO power
	mode) to activate/deactivate
	demonstration.
for PLUG&PLAY ...	(on the system only) to exit
	plug&play mode.

English

15