Carson SA-450-80 14V manual Installation, Safety Precautions, Mounting

Page 3

INSTALLATION

Proper installation of the unit is essential for years of safe, reliable operation. Please read all instruction before installing the unit. Failure to follow these instructions can cause serious damage to the unit or vehicle and may void warranties.

SAFETY PRECAUTIONS

For the safety of the installer, vehicle operator, passengers and the community please observe the following safety precautions. Failure to follow all safety precautions and instructions may result in property damage, injury or death.

Qualifications - The installer must have a firm knowledge of basic electricity, vehicle electrical systems and emergency equipment.

Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity. (Ref. OSHA 1910.95 for occupational noise exposure guidelines)

Mounting - Mount the unit for easy access by the vehicle operator. DO NOT mount in air bag deployment area. Assure clearances before drilling in vehicle. To prevent internal damage mounting bolts must not enter case more than 1/4".

Wiring - Use wiring capable of handling the current required. Make sure all connections are tight. Route wiring to prevent wear, overheating and interference with air bag deployment. Install and check all wiring before connection to vehicle battery.

Testing - Test all siren functions after installation to assure proper operation. Test vehicle operation to assure no damage to vehicle.

Keep These Instructions - Keep these instructions in the vehicle or other safe place for future reference. Advise the vehicle operator of the location.

MOUNTING

The mounting bracket supplied can be installed above or below the unit. Choose a mounting location convenient to the operator and away from any air bag deployment areas. Inspect behind mounting area for clearance. Assure adequate ventilation to prevent overheating. Consider wire routing and access to connections, as well as microphone bracket placement. Install mounting bracket to vehicle using 1/4" hardware (not supplied).

If mounting in a rack or console, make sure that mounting bolts do not enter case more than 1/4".

May need to set PA and RADIO VOLUME ADJUST on side of unit before final mounting and installation

A microphone clip along with mounting screws (CP3633) holds the microphone in place.

CP3676 Mounting Bracket

1/4-20 Bolt (CP3966)

Bolt must not pass through cover more than 1/4”

TB0328B

Page 3 of 7

10/18/03

Image 3
Contents Technical Bulletin Operating Temperature Input PowerSiren Mode Output Power Audio Mode Output PowerInstallation Safety PrecautionsMounting Electrical Connections Wiring Harness ConnectionsOperation Return ServiceProblems Symptom Possible Cause CheckDescription Parts

SA-450-80, SA-450-80 14V specifications

The Carson SA-450-80 is a highly versatile power solution known for its robust performance in a variety of applications. Designed to accommodate a range of needs, this compact power unit provides effective energy output while maintaining optimal efficiency. One of the standout features of the SA-450-80 is its 14V output, making it suitable for powering various electronic devices and systems that require reliable and stable voltage.

One of the main technologies incorporated into the Carson SA-450-80 is its advanced voltage regulation system. This technology ensures a steady and consistent output while protecting connected devices from voltage fluctuations. This feature is particularly crucial in sensitive applications, such as automotive electronics and other critical systems, where power instability may cause operational issues or even damage to the equipment.

The SA-450-80 also boasts a lightweight and durable design. Constructed with high-quality materials, this power unit is built to withstand harsh conditions, making it ideal for both indoor and outdoor applications. Its compact size allows for easy portability, enabling users to transport it conveniently to various work sites or projects.

In terms of performance, the Carson SA-450-80 excels with an output capacity of 450 watts, making it capable of powering a wide array of devices. Whether used in recreational vehicles, for home appliances, or in industrial settings, this power unit delivers reliable performance that users can count on.

Additionally, the SA-450-80 features enhanced thermal management technology which helps maintain optimal operating temperatures. This innovation not only prolongs the life of the unit but also ensures efficient operation, reducing the risk of overheating during extended use.

Moreover, the SA-450-80 is equipped with multiple output options. These include standard AC and DC outputs, offering compatibility with various devices and enhancing its versatility. Users can easily connect their equipment, making it an efficient power solution for diverse applications.

In conclusion, the Carson SA-450-80 14V power unit stands out for its combination of advanced technologies, reliable performance, and practical design. With features that ensure voltage stability, portability, and durability, it serves as an excellent choice for anyone seeking a dependable power source for multiple uses, whether in professional or recreational contexts.