Asus A7N8X-XE manual Security, Wait for ʻF1ʼ If Error Enabled, Hit ʻDELʼ Message Display Enabled

Page 61

Wait for ʻF1ʼ If Error [Enabled]

When set to Enabled, the system waits for the F1 key to be pressed when error occurs. configuration options: [Disabled] [Enabled]

Hit ʻDELʼ Message Display [Enabled]

When set to Enabled, the system displays the message “Press DEL to run Setup” during POST. Configuration options: [Disabled] [Enabled]

2.6.3Security

This menu allows you to adjust the system security settings.

 

BIOS SETUP UTILITY

 

 

Security Settings

 

<Enter> to change

 

 

password.

 

 

Supervisor Password

:Not Installed

<Enter> again to

User Password

:Not Installed

disable password.

Change Supervisor Password

 

 

Change User Password

 

 

 

 

 

←→

Select Screen

 

 

↑↓

Select Item

 

 

Enter

change

 

 

F1

General Help

 

 

F10

Save and Exit

 

 

ESC

Exit

v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.

Change Supervisor Password

Select this item to set or change the supervisor password. The Supervisor Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed.

To set a password:

1.Select the Change Supervisor Password item and press <Enter>.

2.From the password box, type a password composed of at least six letters and/or numbers, then press <Enter>.

3.Confirm the password when prompted.

The message “Password Installed” appears after you successfully set your password.

To change the supervisor password, follow the same steps as in setting a user password.

To clear the supervisor passowrd, select the Change Supervisor Password then press <Enter>. The message “Password Uninistalled” appears.

ASUS A7N8X-XE Motherboard

2-29

Image 61
Contents Motherboard E2126 First Edition July Contents Chapter Bios Setup Canadian Department of Communications Statement Federal Communications Commission StatementOperation safety Electrical safetyHow this guide is organized Where to find more informationConventions used in this guide A7N8X-XE Specifications Summary Support CD Page Introduction Special features Package contentsWelcome Integrated 10/100 LAN controller Serial ATA technologyCoaxial S/PDIF out USB 2.0 technologyInnovative Asus features Before you proceed Motherboard layout Motherboard overviewScrew holes Placement directionCentral Processing Unit CPU Installing the CPUOverview Memory configurations System memoryRecommended memory configurations SS/DS DDR400 Qualified Vendors ListRemoving a Dimm Installing a DimmExpansion slots Installing an expansion card2 Configuring an expansion card IRQ assignments for this motherboard Standard interrupt assignmentsPCI slots AGP slotClear RTC RAM Clrtc JumpersA7N8X-XE PS2/USB Device Wake-up PS2/USB Device Wake-up 3-pin PS2USBPWRear panel connectors ConnectorsAudio 2, 4, or 6-channel configuration Floppy disk drive connector 34-1 pin Floppy Internal connectorsIDE connectors 40-1 pin PRIIDE, Secide CPU and chassis fan connectors 3-pin CPUFAN, Chafan Serial ATA connectors 7-pin SATA1, SATA2Internal audio connectors 4-pin CD, AUX USB connectors 10-1 pin USB56, USB78ATX power connector 20-pin Atxpwr Front panel audio connectors 10-1 pin FpaudioSystem power LED 3-1 pin Pled System panel connector 20-pin PanelReset button 2-pin Reset ATX power button/soft-off button 2-pin PwrbtnBios Setup Creating a bootable floppy disk Managing and updating your BiosUsing Afudos to update the Bios Using Afudos to copy the current BiosAfudos /ofilename Afudos /i filename.rom Asus CrashFree Bios utility To update the Bios using Asus EZ Flash Using Asus EZ Flash to update the BiosInstalling Asus Update Asus Update utilityUpdating the Bios through the Internet Updating the Bios through a Bios file Flash ROM Bios setup programNavigation keys Bios menu barTab F10General help Saving changes and exiting the Setup programScroll bar Sub-menuMain menu Legacy Diskette B DisabledSystem Time hhmmss System Date day, mm dd yyyyType Auto LBA/Large Mode AutoBlock Multi-sector Transfer M Auto Type AutoSystem Information JumperFree Configuration Bios Setup UtilityAI Overclock Tuner Auto JumperFree ConfigurationUSB 2.0 Support Enabled USB Controller EnabledUSB Configuration Legacy USB Support AutoCPU Configuration CPU Internal Cache DisabledChipset NorthBridge ConfigurationTV Mode Support Default MDA Access Control PCIC1 Discounnect Auto Mode NorthBridge Chipset ConfigurationMemory Clock Auto System Performance SettingsDram Timing Auto TrasMAC Bridge Mode Auto Onboard LAN EnabledOnBoard Sata Controller Enabled Sata Operation Mode non-RAIDOnboard Devices Configuration PCIPnP Suspend Mode Auto Power menuAcpi Apic Support Enabled Repost Video on S3 Resume NoAPM Configuration Ring-In Power On Disabled PME Resume DisabledRTC Resume Disabled Resume On PS/2 Keyboard EnabledHardware Monitor MB Temperature xxxC/xxxF CPU Temperature xxxC/xxxFVcore Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage Boot Device Priority Boot menu1st ~ xxth Boot Device Removable CDROMSM-ASUS DVDBoot Settings Configuration Hit ʻDELʼ Message Display Enabled Wait for ʻF1ʼ If Error EnabledChange Supervisor Password Change Supervisor PasswordChange User Password Exit menu Load Setup DefaultsExit & Save Changes Exit & Discard ChangesSoftware Support Support CD information Installing an operating systemRunning the support CD Utilities menu Drivers menuContacts menu Asus UpdateAsus Screen Saver Adobe Acrobat Reader Microsoft DirectX 9.0c