Electrical Connections Amplifier | Carson SA-441-17 specs

Page 8 of 15

SA-441-17 Installation and Operating Instructions

ELECTRICAL CONNECTIONS - Amplifier

Electrical connections to the amplifier are made using a terminal block plug located on the amplifier. A label on the unit identifies each terminal function. You should install the plug on the unit before wiring. If the unit needs service the plug can be easily removed without unwiring. The power supply of the unit must be capable of delivering peak currents up to 50 amps for adequate short circuit protection and reliable operation. The preferred source is directly at the vehicle battery. The amplifier is fused near connector.

Attach leads by stripping 3/8", inserting into connector and clamp by tightening screw. Make sure the screw is tight and the wire can't be pulled out.

Failure to adequately tighten the screw can result in improper operation or burning the connector and wire.

Wire Size and Termination - The diagram shows the minimum wire size used for each connection, along with recommended lead color. If the wire is longer than 10 ft. use the next larger wire size. The power lead pairs can be extended with single #10 AWG lead wire. Use only high quality crimp connectors for installation on the vehicle.

Please note that three leads are connected to the speakers – one common lead to the negative of both speakers and one lead to each positive speaker terminal. This is necessary for proper operation.

Optional Radio Input Connection - Connect one lead to each terminal of the radio speaker or output connector. The input is isolated and polarity is not important. May need to set RADIO VOLUME ADJUST on side of amplifier.

ELECTRICAL CONNECTIONS – Control Head

All control head leads can be extended with #22 AWG or larger lead wire. Black: Negative - Connect to same ground or negative supply as amplifier.

Red: Positive - May be connected to +VDC supply. It is recommended that the lead be connected to the accessory output of the fuse block. This provides additional protection of a fused input to the control head.

Yellow: Lights - This lead may be connected to the dash lights or to the red power lead. Connecting to the dash lights will turn on the panel lights whenever the dash lights are on. When connected to the red lead, make sure that the ignition switch controls the power to that connection. This prevents the panel lights from being continuously on.

White: Control - Connect white leads from amplifier and control head. Route this lead away from the transmitter antenna lead to prevent R.F. interference being fed to the siren amplifier.

Green: Auxiliary Input - Used for Siren control. Performs same function as Siren button. Connect to a normally open switch or to horn ring circuit. Circuit may connect to either positive or negative. When connected to horn ring circuit, use a SPDT switch to connect horn ring to either vehicle horn or to manual control circuit.

NOTE: Permanent disconnection of the vehicle horn is NOT recommended.

NOTE: Be sure to cut lead short if not used and insulate with electrical tape.

CP5008A

07/29/08

SA-441-17 specifications

The Carson SA-441-17 is a versatile and robust handheld digital microscope that has garnered attention for its innovative features and user-friendly design. This remarkable device caters to various applications, ranging from educational use to intricate industrial inspections.

One of the standout features of the Carson SA-441-17 is its high-resolution imaging capabilities. It can deliver crystal-clear, sharp images thanks to its 300X magnification power, paired with a built-in 2.0 MP camera. This ensures that users can capture fine details with precision, making it ideal for tasks such as circuit board inspections, biological studies, or quality control in manufacturing settings.

The microscope boasts a large 4.3-inch LCD screen, which provides a comfortable viewing experience without the need for an external computer or device. This feature allows for immediate observation and analysis of specimens while ensuring that users can easily adjust the focal depth and magnification as needed.

Incorporating advanced LED lighting technology, the Carson SA-441-17 ensures optimal illumination for various types of samples, regardless of lighting conditions. Users can dim or brighten the LED lights according to their requirements, enabling clear visibility of detailed structures.

Portability is another key characteristic of this digital microscope. With its lightweight and compact design, the SA-441-17 is easy to handle, making it suitable for fieldwork and on-the-go inspections. This functionality is amplified by its rechargeable battery, which ensures that users can operate the microscope without being tethered to a power source, enhancing flexibility in various environments.

The device also supports image and video capture, allowing users to document their observations easily. This feature is particularly useful in educational settings where students can record their experiments and share findings with peers. Additionally, the captured images can be transferred to computers for further analysis or reporting, thanks to its USB connectivity.

Moreover, the Carson SA-441-17 is designed with an intuitive interface that makes it accessible for both experienced users and beginners. The simple controls and clear instructions facilitate seamless operation, enabling users to focus on their tasks without getting bogged down by complicated setups.

In summary, the Carson SA-441-17 is an exceptional digital microscope that combines high-resolution imaging, portability, and ease of use. With its advanced lighting options, image capture capabilities, and user-friendly design, it stands out as a valuable tool for educators, hobbyists, and industry professionals alike. Whether used for educational purposes, detailed inspections, or scientific research, the Carson SA-441-17 proves to be an asset in any setting.