DXJ112 Digital Guitar Amplifier
The Rear Panel :
15. Power Switch: Depress the top of this switch to turn the amplifier on. (Allow a few seconds for the amp to respond.)
16. AC Line Cord: Plug the male end of this cord into a properly grounded AC outlet of the correct voltage. DO NOT DEFEAT THE
GROUND PIN OF THE AC PLUG!
17. Stereo Headphones: For those private moments, plug a pair of stereo headphones into this jack. The internal speaker is muted when headphones are used. (Can also be used for recording.)
18.Stereo Line Out: Connect this output to a stereo amplifier or effects unit.
19.Stereo Line In: Connect the output of an external effects unit here.
20. Standard MIDI/Crate Footswitch
Controller: This switch lets you choose how you control your DXJ112 – via MIDI or with the optional Crate Foot Controller.
21. MIDI Thru/Out: Connect to another MIDI device you wish to control with the foot controller.
22. MIDI In/Foot Switch: This jack either accepts a standard MIDI input or lets you use the Crate Foot Controller.
Refer to Section / Page:
“Stereo Headphones Jack” – page 9,10
“The Stereo Line In and Line Out Jacks” – page 7,8
“The Stereo Line In and Line Out Jacks” – page 7,8
“Using the Crate Foot Controller” – page 9,10
“The MIDI Thru/Out Jack” – page 9,10
“Using a MIDI Footswitch” – page 9,10
QUICK START
(That’s all we’re gonna give you for now! To learn a whole lot more, read the rest of this guide!)
6