FXT15 Guitar Amp with Digital Signal Processing
FXT15 TECHNICAL SPECIFICATIONS:
Output Power Rating |
| 12W RMS @ 5% THD, 4Ω , 120 VAC |
|
|
|
Gain | Solo Ch | 86dB |
| Clean Ch | 46dB |
|
| |
Maximum Input Signal Accepted | 2.2 volts RMS min. @ 400Hz | |
|
|
|
Tone Controls | Low | 25dB range @ 80Hz |
| Mid | 19dB range @ 900Hz |
| High | 23dB range @ 5kHz |
|
|
|
Signal To Noise Ratio | Solo Ch | >50dB |
| Clean Ch | >65dB |
|
|
|
Speaker Size and Rating |
| 8” Crate Custom Design 4 ohm |
|
|
|
Power Requirements |
| 120 VAC, 60Hz, 30VA |
|
| 100/115VAC, 50/60Hz, 30VA |
|
| 230VAC, 50/60Hz, 30VA |
|
|
|
Size and Weight |
| 13” H x |
|
|
|
The FXT15 is covered with a durable Tolex material: wipe it clean with a
Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.
Crate continually develops new products, as well as improves existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
www.crateamps.com
©2003 SLM Electronics, a division of St. Louis Music, Inc • 1400 Ferguson Avenue • St. Louis, MO 63133