Front Panel | Crate Amplifiers CA15 specs

CA15 Acoustic Amplifier

The Front Panel:

1,3: Input 1, Input 2. The signal output from your acoustic instrument, tape player, rhythm machine, high-Z microphone or other source may be connected to either or both of these jacks by means of a shielded signal cable. Each of the input jacks is governed by its corresponding gain con- trol (#2 for Input 1, #4 for Input 2). The signals from these two jacks are summed together after their gain stages.

2,4: Gain 1, Gain 2. Use these controls to set the input gain level for the corresponding input jack. These controls set the level of the input signal and serve as the amplifi- er’s volume controls.

5:Low. This serves as the bass control for both channels. Adjust this control to get the best sounding bass response for your instrument. Excessive boost of the low control can cause an unnatural howling (acoustic feedback from your instrument) and should be avoided.

6:Mid. This serves as the midrange control for both channels. Adjust this control to get the best projection and midrange tones for your instrument.

7:High. This serves as the treble control for both channels. Adjust this control so your high notes and harmonic overtones are lively but not overpowering.

8:Reverb Level: Use this control to adjust the amount of reverberation added to the signal. In the fully counter clockwise posi- tion, the signal is dry (no reverb added). As you rotate the control clockwise the amount of reverb increases.

9:CD Input. Use these jacks to connect the output from a CD player, tape deck, or rhythm machine to the amplifier. The CD Input jacks are post EQ and Gain, so use the level control on the CD player (etc.) to adjust the level of the signal at these jacks.

10:Headphones. Use this jack to connect headphones to the amplfier. The internal speaker is disconnected when this jack is used.

11:External Speaker. Use this jack to connect the amplifier to an external speaker. The internal speaker is disconnected when this jack is used. The impedance of the external speaker must be 4 ohms or greater. Do not attempt to use head- phones in the External Speaker jack! Permanent hearing damage could result.

12:Power Switch. (Rear panel, not shown) Use this switch to apply power to the amplifier: the amp is on when the top of the switch is depressed, off when the bot- tom of the switch is depressed. The switch illuminates when the amp is on.

13:AC Line Cord. (Rear panel, not shown) The grounded power cord should only be plugged into a grounded power outlet that meets all applicable electrical codes and is compatible with the voltage, power, and frequency requirements stated on the rear panel. Do not attempt to defeat the safety ground connection.

CA15 specifications

The Crate Amplifiers CA15 is an innovative guitar amplifier designed for musicians seeking versatility and quality sound in a compact package. With a power output of 15 watts, the CA15 is perfect for practice sessions, small gigs, and home recording. One of the standout features of the CA15 is its two-channel design, which allows musicians to switch between clean and overdriven tones seamlessly. This dual-channel setup caters to a variety of musical styles, from crunchy rock riffs to smooth jazz sounds.

The CA15 is equipped with a dynamic 8-inch speaker, providing a warm and rich tone that enhances the overall performance. The amp's cabinet design aids in projecting sound effectively, allowing the user to fill a room without the need for excessive volume. The compact size of the CA15 makes it easily portable, enabling musicians to bring it along to practice sessions or jam with friends.

Another notable feature of the CA15 is its built-in reverb effect. This addition adds depth and dimension to the sound, making it an excellent choice for players who wish to create atmospheric tones. The reverb can be adjusted to suit the player's preference, providing flexibility in sound creation.

The CA15 also includes a 3-band EQ section, featuring bass, midrange, and treble controls. This allows users to sculpt their tone with precision, enhancing specific frequencies to achieve the perfect sound for their style. Additionally, the amp integrates a headphone output, making it ideal for late-night practice without disturbing others.

On the technological front, the CA15 incorporates a robust power management system that ensures reliability and performance during extended use. Its solid-state design translates to less maintenance compared to traditional tube amps, while still delivering high-quality sound.

The rugged construction of the CA15's cabinet ensures it can withstand the rigors of transport and live performance, making it a reliable companion for any musician. With its combination of practical features, quality sound, and portability, the Crate Amplifiers CA15 is an exceptional choice for guitarists looking to elevate their musical experience. Whether for practice, recording, or intimate gigs, the CA15 stands out as a versatile and dependable amplifier that meets the needs of today’s musicians.