In the Soft AP mode, you can limit the wireless clients that associate with the
You can limit the wireless clients that associate with the WLAN adapter through the access control function. Click Configuration > Edit Config > ACL.
To disable the access control function, select Disable in the Access Control Policy page, then click OK.
To allow a wireless client to associate with the
1.Select Enable in the Access Control Policy page, then click Access tab.
2.Key in the client’s MAC address, then click Add MAC.
3.Click OK.
Only the wireless clients on the Accept list are allowed to associate with the
To prevent a wireless client from associating with the WLAN adapter:
1.Select Enable in the Access Control Policy page, then click Reject tab.
2.Key in the client’s MAC address, then click Add MAC.
3.Click OK.
The wireless clients on the Reject list are not allowed to associate with the USB- N66.
ASUS WLAN adapter | 11 |