Chapter 2 - Installation
Configuring with the WLAN utility (Infrastructure)
Use ASUS WLAN utility to get connected with an existing wireless network.
Installation
Chapter 2
1.
2.Check the Config page to set the SSID (network name) to that of your wireless AP.
3.Use Site Survey if you don’t know the
SSID of your access point(s).
4.Encryption settings must match those at the access point. Ask your network administrator about settings if necessary. Click Apply to activate the settings.
5.Check the Status page to see the association state. If connection is established, the box shows “Connected - xx:xx:xx:xx:xx:xx”.
6.Check the Connection tab to see the signal strength. Click OK to exit the utility.
ASUS WLAN Adapter