VC-50H Vintage Club Amplifier
TECHNICAL SPECIFICATIONS:
Output Power Rating | 50W RMS @ 10% THD, 8 ohm load, 120 VAC | ||
|
|
|
|
Input Impedance | 1M ohm |
|
|
|
|
|
|
Maximum Signal Accepted | 2.8V peak to peak |
|
|
|
|
|
|
Signal To Noise Ratio | Channel B: | 52dB |
|
| Channel A: | 58dB |
|
|
|
|
|
Gain | Channel B: | 75dB |
|
| Channel A: | 68dB |
|
|
|
|
|
Tone Control Range | Channel B: | Bass: | 12dB range @60Hz |
|
| Mid: | 10dB range @600Hz |
|
| Treble: | 7dB range @4kHz |
| Channel A: | Bass: | 20dB range @70Hz |
|
| Treble: | 16dB range @2kHz |
|
| ||
Line Out Level | 375mV RMS @ full power output | ||
|
| ||
Tube Types | Preamp: (4) 12AX7 Power Amp: (4) EL84/6BQ5 | ||
|
| ||
Power Requirements | 120VAC, 60Hz, 145VA/30W, 170VA/50W | ||
| 100/115VAC, 50/60Hz, 145VA/30W, 170VA/50W | ||
| 230VAC, 50/60Hz, 145VA/30W, 170VA/50W | ||
|
| ||
Size and Weight | 21.25”W x 11”H x 11.25”D, 35 lbs | ||
|
|
|
|
To keep this amplifier looking its best, avoid abrasive cleaners. Wipe the cabinet clean using a slightly dampened cloth. Never use abrasive cleaners on the hardware since they could damage their protective coatings.
Crate continually develops new products, as well as improves existing ones.
For this reason, the specifications and information in this publication
are subject to change without notice.
www.crateamps.com
©2001 SLM ELECTRONICS • A division of St. Louis Music • 1400 Ferguson Avenue • St. Louis, Mo 63133
P/N